the specified partition could not be formatted

### 磁盘分区无法格式化的原因分析磁盘分区无法格式化的错误可能由多种原因引起，包括但不限于文件系统损坏、硬件故障或权限不足等问题。如果尝试将原始磁盘分区作为 InnoDB 系统表空间的数据文件使用，则需要特别注意非缓冲 I/O 的配置以及测试其对性能的影响[^1]。对于某些情况下的修复操作，可以考虑通过数据库管理工具执行特定命令来处理索引对象的状态问题。例如，在 Oracle 数据库环境中，可以通过 `dbms_repair` 包中的过程来进行部分修复工作[^2]。然而，这种方法仅适用于数据库内部的对象修复，并不适合直接解决磁盘分区本身的问题。当涉及到存储引擎如 RocksDB 时，了解其写入机制有助于排查潜在问题。RocksDB 使用 Write-Ahead Logging (WAL) 和内存表结构 Memtable 来优化写入性能并提供一定的数据持久性保障[^3]。尽管如此，这并不直接影响磁盘分区本身的格式化能力。针对 “partition cannot be formatted” 错误的具体解决方案如下： #### 解决方案一：检查磁盘健康状态运行硬盘检测工具（如 Windows 自带的 CHKDSK 或第三方软件）以验证是否存在物理损伤或其他严重错误。如果有坏扇区报告，则需进一步评估是否能够安全恢复该分区的功能或者更换受损设备。 #### 解决方案二：更改驱动器号与路径设置有时因分配给目标卷的字母冲突而导致无法完成格式化进程。在这种情况下，打开“磁盘管理”，重新指定一个新的未使用的驱动器代号试试看能否解决问题。 #### 解决方案三：低级格式化高级别的快速格式选项可能会跳过一些必要的初始化步骤从而失败；此时可选用更彻底的方式——即所谓的“低级格式”。请注意此方法会完全清除所有现存资料，请提前做好重要文档备份！以下是利用 DiskPart 实现基本清理的一个简单例子： ```cmd diskpart list disk select disk X /* 将X替换为你实际的目标磁盘编号 */ clean /* 清除整个选定磁盘上的所有分区和信息 */ exit /* 完成后退出程序继续正常格式流程 */ ``` #### 注意事项以上提到的各种手段都存在一定风险特别是涉及破坏性的改动之前一定要确认清楚当前状况并且采取适当预防措施保护有价值的信息不受损害。

创作声明：本文部分内容由AI辅助生成（AIGC），仅供参考

下一篇安装Appium-Python-Client出错

php.ini-development

[PHP] ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; PHP's initialization file, generally called php.ini, is responsible for ; configuring many of the aspects of PHP's behavior. ; PHP attempts to find and load this configuration from a number of locations. ; The following is a summary of its search order: ; 1. SAPI module specific location. ; 2. The PHPRC environment variable. (As of PHP 5.2.0) ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) ; 4. Current working directory (except CLI) ; 5. The web server's directory (for SAPI modules), or directory of PHP ; (otherwise in Windows) ; 6. The directory from the --with-config-file-path compile time option, or the ; Windows directory (C:\windows or C:\winnt) ; See the PHP docs for more specific information. ; http://php.net/configuration.file ; The syntax of the file is extremely simple. Whitespace and lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; Directives following the section heading [PATH=/www/mysite] only ; apply to PHP files in the /www/mysite directory. Directives ; following the section heading [HOST=www.example.com] only apply to ; PHP files served from www.example.com. Directives set in these ; special sections cannot be overridden by user-defined INI files or ; at runtime. Currently, [PATH=] and [HOST=] sections only work under ; CGI/FastCGI. ; http://php.net/ini.sections ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; Directives are variables used to configure PHP or PHP extensions. ; There is no name validation. If PHP can't find an expected ; directive because it is not set or is mistyped, a default value will be used. ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a ; previously set variable or directive (e.g. ${foo}) ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; ^ bitwise XOR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; foo = ; sets foo to an empty string ; foo = None ; sets foo to an empty string ; foo = "None" ; sets foo to the string 'None' ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; PHP comes packaged with two INI files. One that is recommended to be used ; in production environments and one that is recommended to be used in ; development environments. ; php.ini-production contains settings which hold security, performance and ; best practices at its core. But please be aware, these settings may break ; compatibility with older or less security conscience applications. We ; recommending using the production ini in production and testing environments. ; php.ini-development is very similar to its production variant, except it's ; much more verbose when it comes to errors. We recommending using the ; development version only in development environments as errors shown to ; application users can inadvertently leak otherwise secure information. ; This is php.ini-development INI file. ;;;;;;;;;;;;;;;;;;; ; Quick Reference ; ;;;;;;;;;;;;;;;;;;; ; The following are all the settings which are different in either the production ; or development versions of the INIs with respect to PHP's default behavior. ; Please see the actual settings later in the document for more details as to why ; we recommend these changes in PHP's behavior. ; display_errors ; Default Value: On ; Development Value: On ; Production Value: Off ; display_startup_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; error_reporting ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; Development Value: E_ALL ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT ; html_errors ; Default Value: On ; Development Value: On ; Production value: On ; log_errors ; Default Value: Off ; Development Value: On ; Production Value: On ; max_input_time ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; output_buffering ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; register_argc_argv ; Default Value: On ; Development Value: Off ; Production Value: Off ; request_order ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; session.gc_divisor ; Default Value: 100 ; Development Value: 1000 ; Production Value: 1000 ; session.hash_bits_per_character ; Default Value: 4 ; Development Value: 5 ; Production Value: 5 ; short_open_tag ; Default Value: On ; Development Value: Off ; Production Value: Off ; track_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; url_rewriter.tags ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; variables_order ; Default Value: "EGPCS" ; Development Value: "GPCS" ; Production Value: "GPCS" ;;;;;;;;;;;;;;;;;;;; ; php.ini Options ; ;;;;;;;;;;;;;;;;;;;; ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" ;user_ini.filename = ".user.ini" ; To disable this feature set this option to empty value ;user_ini.filename = ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) ;user_ini.cache_ttl = 300 ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. ; http://php.net/engine engine = On ; This directive determines whether or not PHP will recognize code between ; <? and ?> tags as PHP source which should be processed as such. It is ; generally recommended that <?php and ?> should be used and that this feature ; should be disabled, as enabling it may result in issues when generating XML ; documents, however this remains supported for backward compatibility reasons. ; Note that this directive does not control the <?= shorthand tag, which can be ; used regardless of this directive. ; Default Value: On ; Development Value: Off ; Production Value: Off ; http://php.net/short-open-tag short_open_tag = Off ; Allow ASP-style <% %> tags. ; http://php.net/asp-tags asp_tags = Off ; The number of significant digits displayed in floating point numbers. ; http://php.net/precision precision = 14 ; Output buffering is a mechanism for controlling how much output data ; (excluding headers and cookies) PHP should keep internally before pushing that ; data to the client. If your application's output exceeds this setting, PHP ; will send that data in chunks of roughly the size you specify. ; Turning on this setting and managing its maximum buffer size can yield some ; interesting side-effects depending on your application and web server. ; You may be able to send headers and cookies after you've already sent output ; through print or echo. You also may see performance benefits if your server is ; emitting less packets due to buffered output versus PHP streaming the output ; as it gets it. On production servers, 4096 bytes is a good setting for performance ; reasons. ; Note: Output buffering can also be controlled via Output Buffering Control ; functions. ; Possible Values: ; On = Enabled and buffer is unlimited. (Use with caution) ; Off = Disabled ; Integer = Enables the buffer and sets its maximum size in bytes. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; http://php.net/output-buffering output_buffering = 4096 ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ; http://php.net/output-handler ;output_handler = ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. ; http://php.net/zlib.output-compression zlib.output_compression = Off ; http://php.net/zlib.output-compression-level ;zlib.output_compression_level = -1 ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ; http://php.net/zlib.output-handler ;zlib.output_handler = ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. ; http://php.net/implicit-flush ; Note: This directive is hardcoded to On for the CLI SAPI implicit_flush = Off ; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. A warning appears if the specified function is ; not defined, or if the function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func = ; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 17 ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/open-basedir ;open_basedir = ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-functions disable_functions = ; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-classes disable_classes = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ; http://php.net/syntax-highlighting ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.default = #0000BB ;highlight.html = #000000 ; If enabled, the request will be allowed to complete even if the user aborts ; the request. Consider enabling it if executing long requests, which may end up ; being interrupted by the user or a browser timing out. PHP's default behavior ; is to disable this feature. ; http://php.net/ignore-user-abort ;ignore_user_abort = On ; Determines the size of the realpath cache to be used by PHP. This value should ; be increased on systems where PHP opens many files to reflect the quantity of ; the file operations performed. ; http://php.net/realpath-cache-size ;realpath_cache_size = 16k ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://php.net/realpath-cache-ttl ;realpath_cache_ttl = 120 ; Enables or disables the circular reference collector. ; http://php.net/zend.enable-gc zend.enable_gc = On ; If enabled, scripts may be written in encodings that are incompatible with ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such ; encodings. To use this feature, mbstring extension must be enabled. ; Default: Off ;zend.multibyte = Off ; Allows to set the default encoding for the scripts. This value will be used ; unless "declare(encoding=...)" directive appears at the top of the script. ; Only affects if zend.multibyte is set. ; Default: "" ;zend.script_encoding = ;;;;;;;;;;;;;;;;; ; Miscellaneous ; ;;;;;;;;;;;;;;;;; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. ; http://php.net/expose-php expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; ; Maximum execution time of each script, in seconds ; http://php.net/max-execution-time ; Note: This directive is hardcoded to 0 for the CLI SAPI max_execution_time = 30 ; Maximum amount of time each script may spend parsing request data. It's a good ; idea to limit this time on productions servers in order to eliminate unexpectedly ; long running scripts. ; Note: This directive is hardcoded to -1 for the CLI SAPI ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; http://php.net/max-input-time max_input_time = 60 ; Maximum input variable nesting level ; http://php.net/max-input-nesting-level ;max_input_nesting_level = 64 ; How many GET/POST/COOKIE input variables may be accepted ; max_input_vars = 1000 ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 128M ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; This directive informs PHP of which errors, warnings and notices you would like ; it to take action for. The recommended way of setting values for this ; directive is through the use of the error level constants and bitwise ; operators. The error level constants are below here for convenience as well as ; some common settings and their meanings. ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT ; those related to E_NOTICE and E_STRICT, which together cover best practices and ; recommended coding standards in PHP. For performance reasons, this is the ; recommend error reporting setting. Your production server shouldn't be wasting ; resources complaining about best practices and coding standards. That's what ; development servers and development settings are for. ; Note: The php.ini-development file has this setting as E_ALL. This ; means it pretty much reports everything which is exactly what you want during ; development and early testing. ; ; Error Level Constants: ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; E_DEPRECATED - warn about code that will not work in future versions ; of PHP ; E_USER_DEPRECATED - user-generated deprecation warnings ; ; Common Values: ; E_ALL (Show all errors, warnings and notices including coding standards.) ; E_ALL & ~E_NOTICE (Show all errors, except for notices) ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; Development Value: E_ALL ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT ; http://php.net/error-reporting error_reporting = E_ALL ; This directive controls whether or not and where PHP will output errors, ; notices and warnings too. Error output is very useful during development, but ; it could be very dangerous in production environments. Depending on the code ; which is triggering the error, sensitive information could potentially leak ; out of your application such as database usernames and passwords or worse. ; It's recommended that errors be logged on production servers rather than ; having the errors sent to STDOUT. ; Possible Values: ; Off = Do not display any errors ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) ; On or stdout = Display errors to STDOUT ; Default Value: On ; Development Value: On ; Production Value: Off ; http://php.net/display-errors display_errors = On ; The display of errors which occur during PHP's startup sequence are handled ; separately from display_errors. PHP's default behavior is to suppress those ; errors from clients. Turning the display of startup errors on can be useful in ; debugging configuration problems. But, it's strongly recommended that you ; leave this setting off on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/display-startup-errors display_startup_errors = On ; Besides displaying errors, PHP can also log errors to locations such as a ; server-specific log, STDERR, or a location specified by the error_log ; directive found below. While errors should not be displayed on productions ; servers they should still be monitored and logging is a great way to do that. ; Default Value: Off ; Development Value: On ; Production Value: On ; http://php.net/log-errors log_errors = On ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. ; http://php.net/log-errors-max-len log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same ; line unless ignore_repeated_source is set true. ; http://php.net/ignore-repeated-errors ignore_repeated_errors = Off ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; source lines. ; http://php.net/ignore-repeated-source ignore_repeated_source = Off ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list ; http://php.net/report-memleaks report_memleaks = On ; This setting is on by default. ;report_zend_debug = 0 ; Store the last error/warning message in $php_errormsg (boolean). Setting this value ; to On can assist in debugging and is appropriate for development servers. It should ; however be disabled on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/track-errors track_errors = On ; Turn off normal error reporting and emit XML-RPC error XML ; http://php.net/xmlrpc-errors ;xmlrpc_errors = 0 ; An XML-RPC faultCode ;xmlrpc_error_number = 0 ; When PHP displays or logs an error, it has the capability of formatting the ; error message as HTML for easier reading. This directive controls whether ; the error message is formatted as HTML or not. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: On ; Development Value: On ; Production value: On ; http://php.net/html-errors html_errors = On ; If html_errors is set to On *and* docref_root is not empty, then PHP ; produces clickable error messages that direct to a page describing the error ; or function causing the error in detail. ; You can download a copy of the PHP manual from http://php.net/docs ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. PHP's default behavior is to leave these settings empty, in which ; case no links to documentation are generated. ; Note: Never use this feature for production boxes. ; http://php.net/docref-root ; Examples ;docref_root = "/phpmanual/" ; http://php.net/docref-ext ;docref_ext = .html ; String to output before an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-prepend-string ; Example: ;error_prepend_string = "<span style='color: #ff0000'>" ; String to output after an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-append-string ; Example: ;error_append_string = "</span>" ; Log errors to specified file. PHP's default behavior is to leave this value ; empty. ; http://php.net/error-log ; Example: ;error_log = php_errors.log ; Log errors to syslog (Event Log on Windows). ;error_log = syslog ;windows.show_crt_warning ; Default value: 0 ; Development value: 0 ; Production value: 0 ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; The separator used in PHP generated URLs to separate arguments. ; PHP's default setting is "&". ; http://php.net/arg-separator.output ; Example: ;arg_separator.output = "&" ; List of separator(s) used by PHP to parse input URLs into variables. ; PHP's default setting is "&". ; NOTE: Every character in this directive is considered as separator! ; http://php.net/arg-separator.input ; Example: ;arg_separator.input = ";&" ; This directive determines which super global arrays are registered when PHP ; starts up. G,P,C,E & S are abbreviations for the following respective super ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty ; paid for the registration of these arrays and because ENV is not as commonly ; used as the others, ENV is not recommended on productions servers. You ; can still get access to the environment variables through getenv() should you ; need to. ; Default Value: "EGPCS" ; Development Value: "GPCS" ; Production Value: "GPCS"; ; http://php.net/variables-order variables_order = "GPCS" ; This directive determines which super global data (G,P,C,E & S) should ; be registered into the super global array REQUEST. If so, it also determines ; the order in which that data is registered. The values for this directive are ; specified in the same manner as the variables_order directive, EXCEPT one. ; Leaving this value empty will cause PHP to use the value set in the ; variables_order directive. It does not mean it will leave the super globals ; array REQUEST empty. ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; http://php.net/request-order request_order = "GP" ; This directive determines whether PHP registers $argv & $argc each time it ; runs. $argv contains an array of all the arguments passed to PHP when a script ; is invoked. $argc contains an integer representing the number of arguments ; that were passed when the script was invoked. These arrays are extremely ; useful when running scripts from the command line. When this directive is ; enabled, registering these variables consumes CPU cycles and memory each time ; a script is executed. For performance reasons, this feature should be disabled ; on production servers. ; Note: This directive is hardcoded to On for the CLI SAPI ; Default Value: On ; Development Value: Off ; Production Value: Off ; http://php.net/register-argc-argv register_argc_argv = Off ; When enabled, the ENV, REQUEST and SERVER variables are created when they're ; first used (Just In Time) instead of when the script starts. If these ; variables are not used within a script, having this directive on will result ; in a performance gain. The PHP directive register_argc_argv must be disabled ; for this directive to have any affect. ; http://php.net/auto-globals-jit auto_globals_jit = On ; Whether PHP will read the POST data. ; This option is enabled by default. ; Most likely, you won't want to disable this option globally. It causes $_POST ; and $_FILES to always be empty; the only way you will be able to read the ; POST data will be through the php://input stream wrapper. This can be useful ; to proxy requests or to process the POST data in a memory efficient fashion. ; http://php.net/enable-post-data-reading ;enable_post_data_reading = Off ; Maximum size of POST data that PHP will accept. ; Its value may be 0 to disable the limit. It is ignored if POST data reading ; is disabled through enable_post_data_reading. ; http://php.net/post-max-size post_max_size = 8M ; Automatically add files before PHP document. ; http://php.net/auto-prepend-file auto_prepend_file = ; Automatically add files after PHP document. ; http://php.net/auto-append-file auto_append_file = ; By default, PHP will output a character encoding using ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html ; http://php.net/default-mimetype default_mimetype = "text/html" ; PHP's default character set is set to empty. ; http://php.net/default-charset ;default_charset = "UTF-8" ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is ; to disable this feature. If post reading is disabled through ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated. ; http://php.net/always-populate-raw-post-data ;always_populate_raw_post_data = On ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes" ; ; PHP's default setting for include_path is ".;/path/to/php/pear" ; http://php.net/include-path ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below ; http://php.net/doc-root doc_root = ; The directory under which PHP opens the script using /~username used only ; if nonempty. ; http://php.net/user-dir user_dir = ; Directory in which the loadable extensions (modules) reside. ; http://php.net/extension-dir ; extension_dir = "./" ; On windows: ; extension_dir = "ext" ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. ; http://php.net/enable-dl enable_dl = Off ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; **You CAN safely turn this off for IIS, in fact, you MUST.** ; http://php.net/cgi.force-redirect ;cgi.force_redirect = 1 ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with ; every request. PHP's default behavior is to disable this feature. ;cgi.nph = 1 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; http://php.net/cgi.redirect-status-env ;cgi.redirect_status_env = ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. ; http://php.net/cgi.fix-pathinfo ;cgi.fix_pathinfo=1 ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; http://php.net/fastcgi.impersonate ;fastcgi.impersonate = 1 ; Disable logging through FastCGI connection. PHP's default behavior is to enable ; this feature. ;fastcgi.logging = 0 ; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ; http://php.net/cgi.rfc2616-headers ;cgi.rfc2616_headers = 0 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. ; http://php.net/file-uploads file_uploads = On ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ; http://php.net/upload-tmp-dir ;upload_tmp_dir = ; Maximum allowed size for uploaded files. ; http://php.net/upload-max-filesize upload_max_filesize = 2M ; Maximum number of files that can be uploaded via a single request max_file_uploads = 20 ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; ; Whether to allow the treatment of URLs (like http:// or ftp://) as files. ; http://php.net/allow-url-fopen allow_url_fopen = On ; Whether to allow include/require to open URLs (like http:// or ftp://) as files. ; http://php.net/allow-url-include allow_url_include = Off ; Define the anonymous ftp password (your email address). PHP's default setting ; for this is empty. ; http://php.net/from ;from="john@doe.com" ; Define the User-Agent string. PHP's default setting for this is empty. ; http://php.net/user-agent ;user_agent="PHP" ; Default timeout for socket based streams (seconds) ; http://php.net/default-socket-timeout default_socket_timeout = 60 ; If your scripts have to deal with files from Macintosh systems, ; or you are running on a Mac and need to deal with files from ; unix or win32 systems, setting this flag will cause PHP to ; automatically detect the EOL character in those files so that ; fgets() and file() will work regardless of the source of the file. ; http://php.net/auto-detect-line-endings ;auto_detect_line_endings = Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension ; ; For example, on Windows: ; ; extension=msql.dll ; ; ... or under UNIX: ; ; extension=msql.so ; ; ... or with a path: ; ; extension=/path/to/extension/msql.so ; ; If you only provide the name of the extension, PHP will look for it in its ; default extension directory. ; ; Windows Extensions ; Note that ODBC support is built in, so no dll is needed for it. ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) ; extension folders as well as the separate PECL DLL download (PHP 5). ; Be sure to appropriately set the extension_dir directive. ; ;extension=php_bz2.dll ;extension=php_curl.dll ;extension=php_fileinfo.dll ;extension=php_gd2.dll ;extension=php_gettext.dll ;extension=php_gmp.dll ;extension=php_intl.dll ;extension=php_imap.dll ;extension=php_interbase.dll ;extension=php_ldap.dll ;extension=php_mbstring.dll ;extension=php_exif.dll ; Must be after mbstring as it depends on it ;extension=php_mysql.dll ;extension=php_mysqli.dll ;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client ;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client ;extension=php_openssl.dll ;extension=php_pdo_firebird.dll ;extension=php_pdo_mysql.dll ;extension=php_pdo_oci.dll ;extension=php_pdo_odbc.dll ;extension=php_pdo_pgsql.dll ;extension=php_pdo_sqlite.dll ;extension=php_pgsql.dll ;extension=php_pspell.dll ;extension=php_shmop.dll ; The MIBS data available in the PHP distribution must be installed. ; See http://www.php.net/manual/en/snmp.installation.php ;extension=php_snmp.dll ;extension=php_soap.dll ;extension=php_sockets.dll ;extension=php_sqlite3.dll ;extension=php_sybase_ct.dll ;extension=php_tidy.dll ;extension=php_xmlrpc.dll ;extension=php_xsl.dll ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [CLI Server] ; Whether the CLI web server uses ANSI color coding in its terminal output. cli_server.color = On [Date] ; Defines the default timezone used by the date functions ; http://php.net/date.timezone ;date.timezone = ; http://php.net/date.default-latitude ;date.default_latitude = 31.7667 ; http://php.net/date.default-longitude ;date.default_longitude = 35.2333 ; http://php.net/date.sunrise-zenith ;date.sunrise_zenith = 90.583333 ; http://php.net/date.sunset-zenith ;date.sunset_zenith = 90.583333 [filter] ; http://php.net/filter.default ;filter.default = unsafe_raw ; http://php.net/filter.default-flags ;filter.default_flags = [iconv] ;iconv.input_encoding = ISO-8859-1 ;iconv.internal_encoding = ISO-8859-1 ;iconv.output_encoding = ISO-8859-1 [intl] ;intl.default_locale = ; This directive allows you to produce PHP errors when some error ; happens within intl functions. The value is the level of the error produced. ; Default is 0, which does not produce any errors. ;intl.error_level = E_WARNING [sqlite] ; http://php.net/sqlite.assoc-case ;sqlite.assoc_case = 0 [sqlite3] ;sqlite3.extension_dir = [Pcre] ;PCRE library backtracking limit. ; http://php.net/pcre.backtrack-limit ;pcre.backtrack_limit=100000 ;PCRE library recursion limit. ;Please note that if you set this value to a high number you may consume all ;the available process stack and eventually crash PHP (due to reaching the ;stack size limit imposed by the Operating System). ; http://php.net/pcre.recursion-limit ;pcre.recursion_limit=100000 [Pdo] ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" ; http://php.net/pdo-odbc.connection-pooling ;pdo_odbc.connection_pooling=strict ;pdo_odbc.db2_instance_name [Pdo_mysql] ; If mysqlnd is used: Number of cache slots for the internal result set cache ; http://php.net/pdo_mysql.cache_size pdo_mysql.cache_size = 2000 ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. ; http://php.net/pdo_mysql.default-socket pdo_mysql.default_socket= [Phar] ; http://php.net/phar.readonly ;phar.readonly = On ; http://php.net/phar.require-hash ;phar.require_hash = On ;phar.cache_list = [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = localhost ; http://php.net/smtp-port smtp_port = 25 ; For Win32 only. ; http://php.net/sendmail-from ;sendmail_from = me@example.com ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ; http://php.net/sendmail-path ;sendmail_path = ; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_parameters = ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename mail.add_x_header = On ; The path to a log file that will log all mail() calls. Log entries include ; the full path of the script, line number, To address and headers. ;mail.log = ; Log mail to syslog (Event Log on Windows). ;mail.log = syslog [SQL] ; http://php.net/sql.safe-mode sql.safe_mode = Off [ODBC] ; http://php.net/odbc.default-db ;odbc.default_db = Not yet implemented ; http://php.net/odbc.default-user ;odbc.default_user = Not yet implemented ; http://php.net/odbc.default-pw ;odbc.default_pw = Not yet implemented ; Controls the ODBC cursor model. ; Default: SQL_CURSOR_STATIC (default). ;odbc.default_cursortype ; Allow or prevent persistent links. ; http://php.net/odbc.allow-persistent odbc.allow_persistent = On ; Check that a connection is still valid before reuse. ; http://php.net/odbc.check-persistent odbc.check_persistent = On ; Maximum number of persistent links. -1 means no limit. ; http://php.net/odbc.max-persistent odbc.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ; http://php.net/odbc.max-links odbc.max_links = -1 ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. ; http://php.net/odbc.defaultlrl odbc.defaultlrl = 4096 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of odbc.defaultlrl and odbc.defaultbinmode ; http://php.net/odbc.defaultbinmode odbc.defaultbinmode = 1 ;birdstep.max_links = -1 [Interbase] ; Allow or prevent persistent links. ibase.allow_persistent = 1 ; Maximum number of persistent links. -1 means no limit. ibase.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ibase.max_links = -1 ; Default database name for ibase_connect(). ;ibase.default_db = ; Default username for ibase_connect(). ;ibase.default_user = ; Default password for ibase_connect(). ;ibase.default_password = ; Default charset for ibase_connect(). ;ibase.default_charset = ; Default timestamp format. ibase.timestampformat = "%Y-%m-%d %H:%M:%S" ; Default date format. ibase.dateformat = "%Y-%m-%d" ; Default time format. ibase.timeformat = "%H:%M:%S" [MySQL] ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements ; http://php.net/mysql.allow_local_infile mysql.allow_local_infile = On ; Allow or prevent persistent links. ; http://php.net/mysql.allow-persistent mysql.allow_persistent = On ; If mysqlnd is used: Number of cache slots for the internal result set cache ; http://php.net/mysql.cache_size mysql.cache_size = 2000 ; Maximum number of persistent links. -1 means no limit. ; http://php.net/mysql.max-persistent mysql.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ; http://php.net/mysql.max-links mysql.max_links = -1 ; Default port number for mysql_connect(). If unset, mysql_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. ; http://php.net/mysql.default-port mysql.default_port = ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. ; http://php.net/mysql.default-socket mysql.default_socket = ; Default host for mysql_connect() (doesn't apply in safe mode). ; http://php.net/mysql.default-host mysql.default_host = ; Default user for mysql_connect() (doesn't apply in safe mode). ; http://php.net/mysql.default-user mysql.default_user = ; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. ; http://php.net/mysql.default-password mysql.default_password = ; Maximum time (in seconds) for connect timeout. -1 means no limit ; http://php.net/mysql.connect-timeout mysql.connect_timeout = 60 ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and ; SQL-Errors will be displayed. ; http://php.net/mysql.trace-mode mysql.trace_mode = Off [MySQLi] ; Maximum number of persistent links. -1 means no limit. ; http://php.net/mysqli.max-persistent mysqli.max_persistent = -1 ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements ; http://php.net/mysqli.allow_local_infile ;mysqli.allow_local_infile = On ; Allow or prevent persistent links. ; http://php.net/mysqli.allow-persistent mysqli.allow_persistent = On ; Maximum number of links. -1 means no limit. ; http://php.net/mysqli.max-links mysqli.max_links = -1 ; If mysqlnd is used: Number of cache slots for the internal result set cache ; http://php.net/mysqli.cache_size mysqli.cache_size = 2000 ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. ; http://php.net/mysqli.default-port mysqli.default_port = 3306 ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. ; http://php.net/mysqli.default-socket mysqli.default_socket = ; Default host for mysql_connect() (doesn't apply in safe mode). ; http://php.net/mysqli.default-host mysqli.default_host = ; Default user for mysql_connect() (doesn't apply in safe mode). ; http://php.net/mysqli.default-user mysqli.default_user = ; Default password for mysqli_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. ; http://php.net/mysqli.default-pw mysqli.default_pw = ; Allow or prevent reconnect mysqli.reconnect = Off [mysqlnd] ; Enable / Disable collection of general statistics by mysqlnd which can be ; used to tune and monitor MySQL operations. ; http://php.net/mysqlnd.collect_statistics mysqlnd.collect_statistics = On ; Enable / Disable collection of memory usage statistics by mysqlnd which can be ; used to tune and monitor MySQL operations. ; http://php.net/mysqlnd.collect_memory_statistics mysqlnd.collect_memory_statistics = On ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. ; http://php.net/mysqlnd.net_cmd_buffer_size ;mysqlnd.net_cmd_buffer_size = 2048 ; Size of a pre-allocated buffer used for reading data sent by the server in ; bytes. ; http://php.net/mysqlnd.net_read_buffer_size ;mysqlnd.net_read_buffer_size = 32768 [OCI8] ; Connection: Enables privileged connections using external ; credentials (OCI_SYSOPER, OCI_SYSDBA) ; http://php.net/oci8.privileged-connect ;oci8.privileged_connect = Off ; Connection: The maximum number of persistent OCI8 connections per ; process. Using -1 means no limit. ; http://php.net/oci8.max-persistent ;oci8.max_persistent = -1 ; Connection: The maximum number of seconds a process is allowed to ; maintain an idle persistent connection. Using -1 means idle ; persistent connections will be maintained forever. ; http://php.net/oci8.persistent-timeout ;oci8.persistent_timeout = -1 ; Connection: The number of seconds that must pass before issuing a ; ping during oci_pconnect() to check the connection validity. When ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables ; pings completely. ; http://php.net/oci8.ping-interval ;oci8.ping_interval = 60 ; Connection: Set this to a user chosen connection class to be used ; for all pooled server requests with Oracle 11g Database Resident ; Connection Pooling (DRCP). To use DRCP, this value should be set to ; the same string for all web servers running the same application, ; the database pool must be configured, and the connection string must ; specify to use a pooled server. ;oci8.connection_class = ; High Availability: Using On lets PHP receive Fast Application ; Notification (FAN) events generated when a database node fails. The ; database must also be configured to post FAN events. ;oci8.events = Off ; Tuning: This option enables statement caching, and specifies how ; many statements to cache. Using 0 disables statement caching. ; http://php.net/oci8.statement-cache-size ;oci8.statement_cache_size = 20 ; Tuning: Enables statement prefetching and sets the default number of ; rows that will be fetched automatically after statement execution. ; http://php.net/oci8.default-prefetch ;oci8.default_prefetch = 100 ; Compatibility. Using On means oci_close() will not close ; oci_connect() and oci_new_connect() connections. ; http://php.net/oci8.old-oci-close-semantics ;oci8.old_oci_close_semantics = Off [PostgreSQL] ; Allow or prevent persistent links. ; http://php.net/pgsql.allow-persistent pgsql.allow_persistent = On ; Detect broken persistent links always with pg_pconnect(). ; Auto reset feature requires a little overheads. ; http://php.net/pgsql.auto-reset-persistent pgsql.auto_reset_persistent = Off ; Maximum number of persistent links. -1 means no limit. ; http://php.net/pgsql.max-persistent pgsql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. ; http://php.net/pgsql.max-links pgsql.max_links = -1 ; Ignore PostgreSQL backends Notice message or not. ; Notice message logging require a little overheads. ; http://php.net/pgsql.ignore-notice pgsql.ignore_notice = 0 ; Log PostgreSQL backends Notice message or not. ; Unless pgsql.ignore_notice=0, module cannot log notice message. ; http://php.net/pgsql.log-notice pgsql.log_notice = 0 [Sybase-CT] ; Allow or prevent persistent links. ; http://php.net/sybct.allow-persistent sybct.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. ; http://php.net/sybct.max-persistent sybct.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ; http://php.net/sybct.max-links sybct.max_links = -1 ; Minimum server message severity to display. ; http://php.net/sybct.min-server-severity sybct.min_server_severity = 10 ; Minimum client message severity to display. ; http://php.net/sybct.min-client-severity sybct.min_client_severity = 10 ; Set per-context timeout ; http://php.net/sybct.timeout ;sybct.timeout= ;sybct.packet_size ; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. ; Default: one minute ;sybct.login_timeout= ; The name of the host you claim to be connecting from, for display by sp_who. ; Default: none ;sybct.hostname= ; Allows you to define how often deadlocks are to be retried. -1 means "forever". ; Default: 0 ;sybct.deadlock_retry_count= [bcmath] ; Number of decimal digits for all bcmath functions. ; http://php.net/bcmath.scale bcmath.scale = 0 [browscap] ; http://php.net/browscap ;browscap = extra/browscap.ini [Session] ; Handler used to store/retrieve data. ; http://php.net/session.save-handler session.save_handler = files ; Argument passed to save_handler. In the case of files, this is the path ; where data files are stored. Note: Windows users have to change this ; variable in order to use PHP's session functions. ; ; The path can be defined as: ; ; session.save_path = "N;/path" ; ; where N is an integer. Instead of storing all the session files in ; /path, what this will do is use subdirectories N-levels deep, and ; store the session data in those directories. This is useful if you ; or your OS have problems with lots of files in one directory, and is ; a more efficient layout for servers that handle lots of sessions. ; ; NOTE 1: PHP will not create this directory structure automatically. ; You can use the script in the ext/session dir for that purpose. ; NOTE 2: See the section on garbage collection below if you choose to ; use subdirectories for session storage ; ; The file storage module creates files using mode 600 by default. ; You can change that by using ; ; session.save_path = "N;MODE;/path" ; ; where MODE is the octal representation of the mode. Note that this ; does not overwrite the process's umask. ; http://php.net/session.save-path ;session.save_path = "/tmp" ; Whether to use cookies. ; http://php.net/session.use-cookies session.use_cookies = 1 ; http://php.net/session.cookie-secure ;session.cookie_secure = ; This option forces PHP to fetch and use a cookie for storing and maintaining ; the session id. We encourage this operation as it's very helpful in combating ; session hijacking when not specifying and managing your own session id. It is ; not the end all be all of session hijacking defense, but it's a good start. ; http://php.net/session.use-only-cookies session.use_only_cookies = 1 ; Name of the session (used as cookie name). ; http://php.net/session.name session.name = PHPSESSID ; Initialize session on request startup. ; http://php.net/session.auto-start session.auto_start = 0 ; Lifetime in seconds of cookie or, if 0, until browser is restarted. ; http://php.net/session.cookie-lifetime session.cookie_lifetime = 0 ; The path for which the cookie is valid. ; http://php.net/session.cookie-path session.cookie_path = / ; The domain for which the cookie is valid. ; http://php.net/session.cookie-domain session.cookie_domain = ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. ; http://php.net/session.cookie-httponly session.cookie_httponly = ; Handler used to serialize data. php is the standard serializer of PHP. ; http://php.net/session.serialize-handler session.serialize_handler = php ; Defines the probability that the 'garbage collection' process is started ; on every session initialization. The probability is calculated by using ; gc_probability/gc_divisor. Where session.gc_probability is the numerator ; and gc_divisor is the denominator in the equation. Setting this value to 1 ; when the session.gc_divisor value is 100 will give you approximately a 1% chance ; the gc will run on any give request. ; Default Value: 1 ; Development Value: 1 ; Production Value: 1 ; http://php.net/session.gc-probability session.gc_probability = 1 ; Defines the probability that the 'garbage collection' process is started on every ; session initialization. The probability is calculated by using the following equation: ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and ; session.gc_divisor is the denominator in the equation. Setting this value to 1 ; when the session.gc_divisor value is 100 will give you approximately a 1% chance ; the gc will run on any give request. Increasing this value to 1000 will give you ; a 0.1% chance the gc will run on any give request. For high volume production servers, ; this is a more efficient approach. ; Default Value: 100 ; Development Value: 1000 ; Production Value: 1000 ; http://php.net/session.gc-divisor session.gc_divisor = 1000 ; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. ; http://php.net/session.gc-maxlifetime session.gc_maxlifetime = 1440 ; NOTE: If you are using the subdirectory option for storing session files ; (see session.save_path above), then garbage collection does *not* ; happen automatically. You will need to do your own garbage ; collection through a shell script, cron entry, or some other method. ; For example, the following script would is the equivalent of ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): ; find /path/to/sessions -cmin +24 -type f | xargs rm ; Check HTTP Referer to invalidate externally stored URLs containing ids. ; HTTP_REFERER has to contain this substring for the session to be ; considered as valid. ; http://php.net/session.referer-check session.referer_check = ; How many bytes to read from the file. ; http://php.net/session.entropy-length ;session.entropy_length = 32 ; Specified here to create the session id. ; http://php.net/session.entropy-file ; Defaults to /dev/urandom ; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom ; If neither are found at compile time, the default is no entropy file. ; On windows, setting the entropy_length setting will activate the ; Windows random source (using the CryptoAPI) ;session.entropy_file = /dev/urandom ; Set to {nocache,private,public,} to determine HTTP caching aspects ; or leave this empty to avoid sending anti-caching headers. ; http://php.net/session.cache-limiter session.cache_limiter = nocache ; Document expires after n minutes. ; http://php.net/session.cache-expire session.cache_expire = 180 ; trans sid support is disabled by default. ; Use of trans sid may risk your users security. ; Use this option with caution. ; - User may send URL contains active session ID ; to other person via. email/irc/etc. ; - URL that contains active session ID may be stored ; in publicly accessible computer. ; - User may access your site with the same session ID ; always using URL stored in browser's history or bookmarks. ; http://php.net/session.use-trans-sid session.use_trans_sid = 0 ; Select a hash function for use in generating session ids. ; Possible Values ; 0 (MD5 128 bits) ; 1 (SHA-1 160 bits) ; This option may also be set to the name of any hash function supported by ; the hash extension. A list of available hashes is returned by the hash_algos() ; function. ; http://php.net/session.hash-function session.hash_function = 0 ; Define how many bits are stored in each character when converting ; the binary hash data to something readable. ; Possible values: ; 4 (4 bits: 0-9, a-f) ; 5 (5 bits: 0-9, a-v) ; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") ; Default Value: 4 ; Development Value: 5 ; Production Value: 5 ; http://php.net/session.hash-bits-per-character session.hash_bits_per_character = 5 ; The URL rewriter will look for URLs in a defined set of HTML tags. ; form/fieldset are special; if you include them here, the rewriter will ; add a hidden <input> field with the info which is otherwise appended ; to URLs. If you want XHTML conformity, remove the form entry. ; Note that all valid entries require a "=", even if no value follows. ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; http://php.net/url-rewriter.tags url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" ; Enable upload progress tracking in $_SESSION ; Default Value: On ; Development Value: On ; Production Value: On ; http://php.net/session.upload-progress.enabled ;session.upload_progress.enabled = On ; Cleanup the progress information as soon as all POST data has been read ; (i.e. upload completed). ; Default Value: On ; Development Value: On ; Production Value: On ; http://php.net/session.upload-progress.cleanup ;session.upload_progress.cleanup = On ; A prefix used for the upload progress key in $_SESSION ; Default Value: "upload_progress_" ; Development Value: "upload_progress_" ; Production Value: "upload_progress_" ; http://php.net/session.upload-progress.prefix ;session.upload_progress.prefix = "upload_progress_" ; The index name (concatenated with the prefix) in $_SESSION ; containing the upload progress information ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" ; http://php.net/session.upload-progress.name ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" ; How frequently the upload progress should be updated. ; Given either in percentages (per-file), or in bytes ; Default Value: "1%" ; Development Value: "1%" ; Production Value: "1%" ; http://php.net/session.upload-progress.freq ;session.upload_progress.freq = "1%" ; The minimum delay between updates, in seconds ; Default Value: 1 ; Development Value: 1 ; Production Value: 1 ; http://php.net/session.upload-progress.min-freq ;session.upload_progress.min_freq = "1" [MSSQL] ; Allow or prevent persistent links. mssql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. mssql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. mssql.max_links = -1 ; Minimum error severity to display. mssql.min_error_severity = 10 ; Minimum message severity to display. mssql.min_message_severity = 10 ; Compatibility mode with old versions of PHP 3.0. mssql.compatability_mode = Off ; Connect timeout ;mssql.connect_timeout = 5 ; Query timeout ;mssql.timeout = 60 ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textlimit = 4096 ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textsize = 4096 ; Limits the number of records in each batch. 0 = all records in one batch. ;mssql.batchsize = 0 ; Specify how datetime and datetim4 columns are returned ; On => Returns data converted to SQL server settings ; Off => Returns values as YYYY-MM-DD hh:mm:ss ;mssql.datetimeconvert = On ; Use NT authentication when connecting to the server mssql.secure_connection = Off ; Specify max number of processes. -1 = library default ; msdlib defaults to 25 ; FreeTDS defaults to 4096 ;mssql.max_procs = -1 ; Specify client character set. ; If empty or not set the client charset from freetds.conf is used ; This is only used when compiled with FreeTDS ;mssql.charset = "ISO-8859-1" [Assertion] ; Assert(expr); active by default. ; http://php.net/assert.active ;assert.active = On ; Issue a PHP warning for each failed assertion. ; http://php.net/assert.warning ;assert.warning = On ; Don't bail out by default. ; http://php.net/assert.bail ;assert.bail = Off ; User-function to be called if an assertion fails. ; http://php.net/assert.callback ;assert.callback = 0 ; Eval the expression with current error_reporting(). Set to true if you want ; error_reporting(0) around the eval(). ; http://php.net/assert.quiet-eval ;assert.quiet_eval = 0 [COM] ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs ; http://php.net/com.typelib-file ;com.typelib_file = ; allow Distributed-COM calls ; http://php.net/com.allow-dcom ;com.allow_dcom = true ; autoregister constants of a components typlib on com_load() ; http://php.net/com.autoregister-typelib ;com.autoregister_typelib = true ; register constants casesensitive ; http://php.net/com.autoregister-casesensitive ;com.autoregister_casesensitive = false ; show warnings on duplicate constant registrations ; http://php.net/com.autoregister-verbose ;com.autoregister_verbose = true ; The default character set code-page to use when passing strings to and from COM objects. ; Default: system ANSI code page ;com.code_page= [mbstring] ; language for internal character representation. ; http://php.net/mbstring.language ;mbstring.language = Japanese ; internal/script encoding. ; Some encoding cannot work as internal encoding. ; (e.g. SJIS, BIG5, ISO-2022-*) ; http://php.net/mbstring.internal-encoding ;mbstring.internal_encoding = EUC-JP ; http input encoding. ; http://php.net/mbstring.http-input ;mbstring.http_input = auto ; http output encoding. mb_output_handler must be ; registered as output buffer to function ; http://php.net/mbstring.http-output ;mbstring.http_output = SJIS ; enable automatic encoding translation according to ; mbstring.internal_encoding setting. Input chars are ; converted to internal encoding by setting this to On. ; Note: Do _not_ use automatic encoding translation for ; portable libs/applications. ; http://php.net/mbstring.encoding-translation ;mbstring.encoding_translation = Off ; automatic encoding detection order. ; auto means ; http://php.net/mbstring.detect-order ;mbstring.detect_order = auto ; substitute_character used when character cannot be converted ; one from another ; http://php.net/mbstring.substitute-character ;mbstring.substitute_character = none; ; overload(replace) single byte functions by mbstring functions. ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), ; etc. Possible values are 0,1,2,4 or combination of them. ; For example, 7 for overload everything. ; 0: No overload ; 1: Overload mail() function ; 2: Overload str*() functions ; 4: Overload ereg*() functions ; http://php.net/mbstring.func-overload ;mbstring.func_overload = 0 ; enable strict encoding detection. ;mbstring.strict_detection = Off ; This directive specifies the regex pattern of content types for which mb_output_handler() ; is activated. ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) ;mbstring.http_output_conv_mimetype= [gd] ; Tell the jpeg decode to ignore warnings and try to create ; a gd image. The warning will then be displayed as notices ; disabled by default ; http://php.net/gd.jpeg-ignore-warning ;gd.jpeg_ignore_warning = 0 [exif] ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. ; With mbstring support this will automatically be converted into the encoding ; given by corresponding encode setting. When empty mbstring.internal_encoding ; is used. For the decode settings you can distinguish between motorola and ; intel byte order. A decode setting cannot be empty. ; http://php.net/exif.encode-unicode ;exif.encode_unicode = ISO-8859-15 ; http://php.net/exif.decode-unicode-motorola ;exif.decode_unicode_motorola = UCS-2BE ; http://php.net/exif.decode-unicode-intel ;exif.decode_unicode_intel = UCS-2LE ; http://php.net/exif.encode-jis ;exif.encode_jis = ; http://php.net/exif.decode-jis-motorola ;exif.decode_jis_motorola = JIS ; http://php.net/exif.decode-jis-intel ;exif.decode_jis_intel = JIS [Tidy] ; The path to a default tidy configuration file to use when using tidy ; http://php.net/tidy.default-config ;tidy.default_config = /usr/local/lib/php/default.tcfg ; Should tidy clean and repair output automatically? ; WARNING: Do not use this option if you are generating non-html content ; such as dynamic images ; http://php.net/tidy.clean-output tidy.clean_output = Off [soap] ; Enables or disables WSDL caching feature. ; http://php.net/soap.wsdl-cache-enabled soap.wsdl_cache_enabled=1 ; Sets the directory name where SOAP extension will put cache files. ; http://php.net/soap.wsdl-cache-dir soap.wsdl_cache_dir="/tmp" ; (time to live) Sets the number of second while cached file will be used ; instead of original one. ; http://php.net/soap.wsdl-cache-ttl soap.wsdl_cache_ttl=86400 ; Sets the size of the cache limit. (Max. number of WSDL files to cache) soap.wsdl_cache_limit = 5 [sysvshm] ; A default size of the shared memory segment ;sysvshm.init_mem = 10000 [ldap] ; Sets the maximum number of open links or -1 for unlimited. ldap.max_links = -1 [mcrypt] ; For more information about mcrypt settings see http://php.net/mcrypt-module-open ; Directory where to load mcrypt algorithms ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) ;mcrypt.algorithms_dir= ; Directory where to load mcrypt modes ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) ;mcrypt.modes_dir= [dba] ;dba.default_handler= [curl] ; A default value for the CURLOPT_CAINFO option. This is required to be an ; absolute path. ;curl.cainfo = ; Local Variables: ; tab-width: 4 ; End:

Radmin自动登录器v3.0-多国语言绿色版-Release1-20150615

Radmin自动登陆器 v3.0 - By: ybmj@vip.163.com 20150615 By: ybmj@vip.163.com , http://dep.yibinu.cn/wgzxnew/ 1、程序功能和使用环境介绍 2、程序操作方法介绍 3、登录信息文件RadminM.txt介绍 4、登录信息文件RadminM.txt的转换和编制 5、v3.0版新增解锁远程桌面功能 6、相关配置和多种语言支持介绍 7、免责申明 1、程序功能和使用环境介绍 (1)、程序功能为了安全高效地使用Radmin Viewer来自动登录和管理多台服务器，故编制RadminM (Radmin Connection Manager，Radmin自动登录器)。 v3.0版的可执行文件是RadminM.exe，一台电脑只能运行一个实例，再次运行只是将已运行的实例调到前台。v3.0版之前的老版本的可执行文件是RadminM2.exe。新版的功能已经比较完善，基本上可以代替Radmin Viewer 3.5进行管理(除Intel AMT功能外)，另外还增加了一些实用功能，支持Windows Xp、Vista、Win7、Win8、2003、2000、9x及相应Windows Server版等操作系统。 (2)、程序使用环境要求使用前请将Radmin Viewer 3.5的Radmin.exe文件直接拷贝到该目录中，其它Radmin Viewer 3.x版本也可以，中文版、英文版均可；请设置防火墙允许Radmin.exe和RadminM.exe(仅扫描功能用)访问网络；若要用到聊天、语音聊天、传送信息等连接模式，必须将相应的8个dll文件也拷贝到该目录中：ChatLPCx.dll、raudiox.dll、rchatx.dll、unicows.dll、vcintcx.dll、vcintsx.dll、voicex.dll、WinLpcDl.dll。 (3)、Radmin Server使用权限设置(新版本可选) 注意：在v1.5及以前的老版本中，Radmin Server被控端必须将“使用权限...”(Permissions)设置为“Windows NT 安全性”(Security)，如果设置为“Radmin安全性”(Security)将不能实现自动登录功能。在新版本中，这两种安全性模式下，都可以实现自动登录功能。 (4)、开发环境 v1.5及以前的老版本用AutoIt语言开发，AutoIt是解释性语言，功能和稳定性有限，并且一些防病毒软件会报警。为了在功能和稳定性方面进一步提高和改进，v2.0版使用VC++ Unicode(MFC)编程，程序在编译时已经集成了VC运行库，可独立运行。由于MFC越益臃肿笨重，为了提高稳定性和效率，v3.0版使用WTL VC++ Unicode编程，程序短小精悍、可独立运行。WTL是Windows Template Library，可参见 http://wtl.sourceforge.net/ 。 2、程序操作方法介绍 (1)、程序中的鼠标操作 * 双击某条记录以默认模式自动连接(等待6秒)；若该记录包含私有代理将自动进行代理连接(代理登录和目标登录各等待6秒)； * 左上角的选择框或主菜单都可以选择默认连接模式； * 先右击某条记录(或F9)填为强制代理(支持域名)，并选中强制代理选项，便可对另一条记录强制进行代理连接(将忽略私有代理)； * 支持鼠标滚轮； * 主菜单和右键菜单均可完成本程序的常规操作；记录窗格的右键菜单或单击工具栏的相应按钮可直接选择进行指定模式的连接(将忽略默认连接模式)； * 主菜单中的“配置”菜单可以选择程序的各项相关配置； * 工具栏各个按钮的功能均有提示； * 单击工具栏上的“显示隐藏树状目录”按钮可以显示隐藏目录树窗格，目录树窗格的右键菜单可完成目录树的一些常规操作； * 单击工具栏上的“选择切换图标查看模式”按钮可以切换或选择记录窗格的图标查看模式； * 记录窗格和目录树窗格都支持鼠标拖放功能，强烈建议用户使用该功能前备份RadminM.txt，以免损坏或丢失数据；直接鼠标拖放为移动，Ctrl+鼠标拖放为复制。拖放时状态栏有提示信息； * 程序启动时，记录自动按记录名称升序排列；在记录窗格单击列表框某列表头，可以按该列进行记录排序，再次单击可以反向排序。 (2)、程序中的常用快捷键 * Enter ：以默认模式连接记录； * Insert ：新建记录； * Ctrl+e ：编辑记录； * Ctrl+c

Radmin自动登录器v3.0

Radmin自动登陆器 v3.0 - By: ybmj@vip.163.com 20180106 By: ybmj@vip.163.com , http://dep.yibinu.cn/wgzxnew/ 1、程序功能和使用环境介绍 2、程序操作方法介绍 3、登录信息文件RadminM.txt介绍 4、登录信息文件RadminM.txt的转换和编制 5、v3.0版新增解锁远程桌面功能 6、相关配置和多种语言支持介绍 7、免责申明 1、程序功能和使用环境介绍 (1)、程序功能为了安全高效地使用Radmin Viewer来自动登录和管理多台服务器，故编制RadminM (Radmin Connection Manager，Radmin自动登录器)。 v3.0版的可执行文件是RadminM.exe，一台电脑只能运行一个实例，再次运行只是将已运行的实例调到前台。v3.0版之前的老版本的可执行文件是RadminM2.exe。新版的功能已经比较完善，基本上可以代替Radmin Viewer 3.5进行管理(除Intel AMT功能外)，另外还增加了一些实用功能，支持Windows Xp、Vista、Win7、Win8、2003、2000、9x及相应Windows Server版等操作系统。 (2)、程序使用环境要求使用前请将Radmin Viewer 3.5的Radmin.exe文件直接拷贝到该目录中，其它Radmin Viewer 3.x版本也可以，中文版、英文版均可；请设置防火墙允许Radmin.exe和RadminM.exe(仅扫描功能用)访问网络；若要用到聊天、语音聊天、传送信息等连接模式，必须将相应的8个dll文件也拷贝到该目录中：ChatLPCx.dll、raudiox.dll、rchatx.dll、unicows.dll、vcintcx.dll、vcintsx.dll、voicex.dll、WinLpcDl.dll。 (3)、Radmin Server使用权限设置(新版本可选) 注意：在v1.5及以前的老版本中，Radmin Server被控端必须将“使用权限...”(Permissions)设置为“Windows NT 安全性”(Security)，如果设置为“Radmin安全性”(Security)将不能实现自动登录功能。在新版本中，这两种安全性模式下，都可以实现自动登录功能。 (4)、开发环境 v1.5及以前的老版本用AutoIt语言开发，AutoIt是解释性语言，功能和稳定性有限，并且一些防病毒软件会报警。为了在功能和稳定性方面进一步提高和改进，v2.0版使用VC++ Unicode(MFC)编程，程序在编译时已经集成了VC运行库，可独立运行。由于MFC越益臃肿笨重，为了提高稳定性和效率，v3.0版使用WTL VC++ Unicode编程，程序短小精悍、可独立运行。WTL是Windows Template Library，可参见 http://wtl.sourceforge.net/ 。 2、程序操作方法介绍 (1)、程序中的鼠标操作 * 双击某条记录以默认模式自动连接(等待6秒)；若该记录包含私有代理将自动进行代理连接(代理登录和目标登录各等待6秒)； * 左上角的选择框或主菜单都可以选择默认连接模式； * 先右击某条记录(或F9)填为强制代理(支持域名)，并选中强制代理选项，便可对另一条记录强制进行代理连接(将忽略私有代理)； * 支持鼠标滚轮； * 主菜单和右键菜单均可完成本程序的常规操作；记录窗格的右键菜单或单击工具栏的相应按钮可直接选择进行指定模式的连接(将忽略默认连接模式)； * 主菜单中的“配置”菜单可以选择程序的各项相关配置； * 工具栏各个按钮的功能均有提示； * 单击工具栏上的“显示隐藏树状目录”按钮可以显示隐藏目录树窗格，目录树窗格的右键菜单可完成目录树的一些常规操作； * 单击工具栏上的“选择切换图标查看模式”按钮可以切换或选择记录窗格的图标查看模式； * 记录窗格和目录树窗格都支持鼠标拖放功能，强烈建议用户使用该功能前备份RadminM.txt，以免损坏或丢失数据；直接鼠标拖放为移动，Ctrl+鼠标拖放为复制。拖放时状态栏有提示信息； * 程序启动时，记录自动按记录名称升序排列；在记录窗格单击列表框某列表头，可以按该列进行记录排序，再次单击可以反向排序。 (2)、程序中的常用快捷键 * Enter ：以默认模式连接记录； * Insert ：新建记录； * Ctrl+e ：编辑记录； * Ctrl+c ：复制记录； * Ctrl+x ：剪切记录； * Ctrl+v ：粘贴记录； * Delete ：删除记录或目录(在记录窗格)，或删除树状目录(在目录树窗格)； * F1 ：显示程序信息； * F2 ：更名树状目录； * F3 ：单条扫描(等待5秒，用于扫描网速较慢的记录)； * F5 ：全部扫描(多线程同时扫描，每条记录等待5秒)；扫描过程中左下角状态栏会有提示，扫描完成后提示消失，扫描过程中建议不要新建、修改、删除、粘贴、剪切、排序记录，不然可能出现扫描结果错乱，其它功能可正常使用； * F7 ：新建树状目录； * F9 ：将选中记录填为强制代理(主菜单上“强制代理信息”项显示将从[无]变为[有]，打开该菜单可查看信息)； * Ctrl+- ：隐藏窗口到系统托盘； * Ctrl+= ：显示窗口； * 双击系统托盘图标可隐藏或显示窗口； * 窗口大小可调整，支持最大化和还原； * 支持Home、End、PageUp、PageDown等操作。 3、登录信息文件RadminM.txt介绍 (1)、RadminM.txt内容说明登录信息存放在RadminM.txt文件中，若没有会自动创建，密码用RC4加密，请用户注意保管。RadminM.txt是遵循CSV格式的ANSI文本文件，所有字段内容都不能包含英文惊叹号“!”、英文逗号“,”、竖线分隔符“|”。第一行为登录记录各字段的名称。每行存放一条记录，每条记录包含用17个英文逗号分隔的18个字段。 RecordName 记录名称是关键字段，支持中文记录名称，不能为空、不要有重名； IP、Port、User、Password 分别是IP地址、端口、用户名、密码。IP地址不能为空，若端口为空程序将使用缺省端口4899； Domain 是域名，该字段有内容在登录时便会自动填写； ColorDepth 是在“完全控制”或“仅限查看”连接模式，指定传输图像的色彩深度。色彩深度大小与传输速度成反比； Updates 是在“完全控制”或“仅限查看”连接模式，指定屏幕每秒最大刷新率，为1到100之间的数值； UnlockDesktop 是在“完全控制”连接模式连接成功后，若远程桌面已登录锁定、且焦点位于密码输入框，可用连接Radmin的密码解锁远程桌面、或 (当服务器端为Radmin Server v3.5时) 先锁定再解锁远程桌面。具体配置参见后面的介绍； Fullscreen 是在“完全控制”或“仅限查看”连接模式，以全屏幕方式、或全屏伸展方式显示远程PC窗口； Nofullkbcontrol 是在“完全控制”连接模式，阻止系统热键(如ALT-TAB)传递到远程PC； Monitor 是在“完全控制”或“仅限查看”连接模式，若远程PC有多个监视器，可指定显示其中某个监视器上的图像。比如：/monitor"\\.\DISPLAY1"。注意：只能指定在已连接窗口的菜单中显示出来的监视器； Sendrequest 是请求Radmin服务器发送Radmin服务器激活文件。将忽略其它选项。详情请参见Radmin帮助文档； Pbpath 是以指定的电话薄文件启动Radmin Viewer。比如：/pbpath"C:\my.rpb"。将忽略其它选项； Proxy 是记录的私有代理信息。私有代理格式：记录名称+目录路径。需要先将某条已有记录设置为强制代理，再选作私有代理。 AsProxyBy 是被用作私有代理字段。是指该记录被其它哪些记录用作私有代理，由程序自动处理(只读)； Memory 是备注字段； TreePath 是目录路径字段，由若干英文惊叹号“!”(目录分隔符)分隔的字符串构成，支持中文目录名，如根目录下DirA子目录下的DirB子目录：!DirA!DirB 。 (2)、私有代理字段Proxy 本程序除了支持强制代理外，每条记录都可以指定私有代理。Proxy字段便是存放用作私有代理的记录信息，只能有一条；注意：只能从已有记录中指定私有代理；Proxy字段的格式：记录名称+目录路径；建议先将某条已有记录设置为强制代理，再到新建记录或编辑记录对话框中填写为私有代理；当然，若熟悉后也可以手工填写。 (3)、被用作私有代理字段AsProxyBy AsProxyBy是被用作私有代理字段，用于存放该记录被其它哪些记录用作私有代理的信息，多条记录间用竖线分隔符“|”分隔，由程序自动处理(只读)；该字段主要用于当该记录名称或目录路径更改时，程序会自动更新将该记录用作私有代理的其它记录的私有代理信息；建议用户不要随意修改RadminM.txt文件中该字段的内容，不然可能会出现程序功能错乱。 (4)、格式符合要求的RadminM.txt文件示范 RecordName,IP,Port,User,Password,Domain,ColorDepth,Updates,UnlockDesktop,Fullscreen,Nofullkbcontrol,Monitor,Sendrequest,Pbpath,Proxy,AsProxyBy,Memory,TreePath sample01,192.168.0.6,4899,user01,,,,,,,,,,,,,,! sample02,192.168.0.8,4899,user02,,,,,,,,,,,,,,!DirA!DirB sample03,192.168.0.9,4899,user03,,,,,,,,,,,,,,!DirC!DirD 4、登录信息文件RadminM.txt的转换和编制 (1)、V2.0转V3.0记录文件单击主菜单、帮助中的“V2.0转V3.0记录文件”菜单项，可以将RadminM V2.0的记录文件转换为RadminM V3.0的记录文件。执行转换之前，请先备份好RadminM.txt。新生成的文件可能覆盖RadminM.txt。 (2)、v1.5的RadminM.txt文件需先转换为v2.0的格式，再导入新版本v3.0中使用 v1.5的RadminM.txt简单修改一下就可以转换为v2.0的格式。修改的具体方法是： (A)用UltraEdit编辑器打开v1.5的RadminM.txt(用其它编辑器也可参照完成类似修改)； (B)Ctrl+R调出替换对话框，在上面需要替换栏输入：^p ，在下面替换为栏输入：,!^p ，(这里，^p代表回车换行)，设置好后再单击“全部替换”按钮即可，需要时可单击“帮助”按钮查看帮助信息； (C)将第一行末尾的 “!” 手工改为 “TreePath”； (D)处理完后保存为RadminM.txt。用其它编辑器也可参照完成类似修改。转换完成后，再用上面介绍的“V2.0转V3.0记录文件”菜单项导入v3.0中使用。 (3)、用记事本、UltraEdit、Excel等编制RadminM.txt RadminM.txt可以用记事本、UltraEdit、Excel等编制。也可将已有RadminM.txt导入Excel处理，具体方法是： (A)启动Excel，选择菜单“数据->导入外部数据->导入数据”，选择RadminM.txt文件； (B)文本导入向导第1步，直接单击“下一步”； (C)第2步必须选中“逗号”分隔符，再单击“下一步”； (D)第3步必须将所有18列都设置为文本，依次选中下面数据预览里的各列，再选择右上面列数据格式里的“文本”。全部设置好后，再单击“完成”、“确定”即可成功导入； (E)处理完后须保存为CSV格式文件，再更名为RadminM.txt便可使用。 5、v3.0版新增解锁远程桌面功能 (1)、解锁远程桌面功能简介当以“完全控制”连接远程PC成功后，若远程桌面已登录锁定、且焦点位于密码输入框，可用连接Radmin的密码解锁远程桌面、或 (当服务器端为Radmin Server v3.5时) 先锁定再解锁远程桌面。要正常使用这一功能，必须满足以下条件：远程PC已经登录、锁定远程桌面的用户密码与连接Radmin的密码一致、远程桌面的焦点位于密码输入框。 (2)、可能存在的安全隐患注意：当服务器端为Radmin Server v3.5之前的老版本、解锁前远程桌面并未锁定而焦点又正好位于文本编辑框中，启用该功能可能会出现明文密码。 (3)、相关配置用户可以为每条记录单独配置解锁远程桌面功能，相关配置信息保存在每条记录的UnlockDesktop字段中。慎重起见，默认并未启用该功能。用户可以根据实际情况，单独为每条记录选择不使用(该字段为空白)、或者“UnlockDesktop”、或者“LockThenUnlock”。该字段为空白，也就是不使用该功能，便不会出现明文密码。 “UnlockDesktop”是指直接解锁远程桌面，适用于Radmin Server各版本，但可能出现明文密码。 “LockThenUnlock”是指若解锁前远程桌面处于未锁定状态、可以先锁定远程桌面再解锁，这样可以避免出现明文密码。但这要求必须使用Radmin Viewer 3.5的Radmin.exe文件，并且只对连接Radmin Server v3.5版本才有效。Radmin Viewer 3.5之前的老版本无法发送锁屏组合键Win+L，Radmin Server v3.5之前的老版本无法接收锁屏组合键Win+L，仍然存在出现明文密码的可能性。 6、相关配置和多种语言支持介绍 (1)、配置文件RadminM.ini 主菜单中的“配置”菜单可以选择程序的各项相关配置。程序的各项配置都保存在RadminM.ini配置文件中，若不存在程序会自动创建。若由于配置混乱、异常关闭等原因导致程序运行后无法显示主窗口，可以先备份然后删除RadminM.ini文件即可正常运行。 (2)、多种语言支持本程序使用INI文件实现多种语言支持，每种语言信息用一个扩展名为lng的INI格式文件存放。语言文件可以使用Unicode或ANSI格式，一般建议使用Unicode格式。这种方式具有更多扩展性，用户可以非常简单方便地添加自己的语言文件。本程序的默认语言是简体中文，另外提供英文语言文件English.lng。本程序启动时若没有外部语言文件，将使用内置的默认语言(简体中文)。若本程序目录下有*.lng的外部语言，程序启动后便会自动在“关于->语言”菜单下列出外部语言(以语言文件的文件名命名)。用户选择某种外部语言便可以动态切换到新语言界面，无需重新启动程序，用户的语言选择将自动保存到RadminM.ini文件中，关闭程序后下次启动也会自动使用用户选择的新语言界面。用户可以参照English.lng语言文件的格式和内容，方便地编制修改自己的语言文件，比如French.lng。用户只需将自己编制好的语言文件拷贝到本程序目录下，重新启动程序后便会自动在“关于->语言”菜单下列出用户添加的新语言French。选择该语言便可以动态切换到新语言界面，无需重新启动程序，关闭程序后下次启动也会自动使用用户选择的新语言界面。注意：语言文件中间不能有空行，空行就意味文件结束，空行之后就无法查找翻译。若需要空行标识分隔，可以在空行前加英文分号 ;，也即注释行。语言文件中的字符串，若需要前导和后导空格，可以将字符串用英文双引号或英文单引号包含即可。不需要空格的就无需加引号。本程序的多种语言支持功能参照网友Yonsm提供的方式实现，有兴趣的用户可以访问网站 http://yonsm.net/ini-language-engine/。 (3)、启用Radmin帮助在本程序中，若要启用菜单项“帮助->Radmin帮助”，需要将Radmin的chm帮助拷贝为本程序目录中的Radmin35.chm。 7、免责申明用户可自行斟酌选用该程序，若转载请注明出处。对一切后果，作者不承担任何责任！ ======================================================================================== RadminM v3.0 - By: ybmj@vip.163.com 20150615 By: ybmj@vip.163.com , http://dep.yibinu.cn/wgzxnew/ 1. The features and the running environmental of RadminM 2. The operation of RadminM 3. RadminM.txt of login information file 4. Translate and Preparation RadminM.txt 5. UnlockDesktop feature of v3.0 newly additional 6. Related settings and Multilanguage support 7. Disclaimer 1. The features and the running environmental of RadminM (1). The features of RadminM In order to safely and efficiently use Radmin Viewer to automatically login and manage multiple servers, so the program RadminM(Radmin Connection Manager) was intended to develop. The executable file is RadminM.exe of RadminM v3.0. Only one instance can run in a computer, and it only bring the running instance to the foreground if RadminM run again. And the executable file of RadminM before v3.0 is RadminM2.exe. The new version have been more improvement of the function, and user basically can manage instead of Radmin Viewer 3.5 (except Intel AMT technology). And there ars some useful features else. It support for Windows Xp, Vista, Win7, Win8, 2003, 2000, 9x and the corresponding version of Windows Server operating systems. (2). The environmental requirements of RadminM running Before use, please copy the Radmin.exe of Radmin Viewer 3.5 to this directory, Other Radmin Viewer 3.x versions of Chinese or English are also available. Please set the firewall to allow Radmin.exe and RadminM.exe (only scan function used) to access the network. To use Text Chat, Voice Chat, Send Message such as connection mode, user must copy also corresponding 8 dll files to this directory: ChatLPCx.dll, raudiox.dll, rchatx.dll, unicows.dll, vcintcx.dll, vcintsx.dll, voicex.dll, WinLpcDl.dll. (3). To set Radmin Server's Permissions(Option in the new version) Note: In v1.5 and previous versions, Radmin Server's "Permissions ..." must be set to "Windows NT security", RadminM can not be automatically login feature if it was set to "Radmin security". The new version can be automatically login in these two security modes. (4). The development environments of RadminM RadminM v1.5 and the previous version is developed by AutoIt language. As AutoIt is an interpreted language, it is limited in the functionality and stability, and some anti-virus software will alarm. In order to further improve the functionality and stability, the new version using VC++ UNICODE(MFC) programming environment. The program had already integrated VC runtime library when it was compiled, it can run independently. Because the MFC is more and more bloated and heavy, in order to further improve the stability and efficiency, v3.0 using WTL VC++ UNICODE programming environment. The program dapper, and can run independently. WTL is the abbreviation of Windows Template Library, user may refer to http://wtl.sourceforge.net/ . 2. The operation of RadminM (1). The mouse operation of RadminM * Double-click a record, RadminM will automatically connect in the default mode(wait 6 second), or RadminM will automatically Proxy connect if the record has Proxy(each of Proxy login and Target login wait respectively 6 second). * You may select the default connection mode at the ComboBox of the top left corner or the main menu. * Right-click a record (or F9) to fill as Forced Proxy (supports domain name) at first, and check the CheckBox of Forced Proxy or the menu item, you can connect another record via Forced Proxy (the Proxy will be ignored). * Mouse wheel support. * You can complete the normal operation with the main menu and right-click menu. By the right-click menu of records pane (Right Pane) or click the corresponding button on the toolbar, you can directly connect in specify mode (the default connection mode will be ignored). * There is the function prompted for each button on the toolbar. * Clicking "Show or Hide Tree" button on the toolbar will show or hide the directory tree pane. You may complete some normal trees operations by right-click menu in trees pane (Left Pane). * Records pane and trees pane support the mouse drag-and-drop function. To avoid damage or loss of data, we strongly recommended to backup RadminM.txt before useing this function. Directly drag-and-drop to move, Ctrl + drag-and-drop to copy. There is the prompted information at the status bar as drag-and-drop. * Records automatically sort in ascending order by record name when the program starts. Clicking the table head of listctrl in records pane will sort records according to this column, and clicking again will sort reverse. (2). The common Shortcuts of RadminM: * Enter : automatically connection in the default mode. * Insert : new record. * Ctrl+e : edit record. * Ctrl+c : copy record. * Ctrl+x : cut record. * Ctrl+v : paste record. * Delete : delete record and subdir (in records pane). delete subdir (in trees pane). * F1 : help information. * F2 : rename subdir (in trees pane) or edit record(in records pane). * F3 : scan one record (wait 5 seconds, used for slowly network). * F5 : scan all records by multithreading (wait 5 second for each record). There is prompt at the status bar of bottom left corner when the scan is processing, and prompt will disappear after the scan has finished. We are not recommended to create, modify, delete, paste, cut, sort records when the scan is processing, otherwise the scan results may appear confusion. But other functions may be used normally. * F7 : new subdir. * F9 : fill the selected record as Forced Proxy. (The "Forced-Proxy" item of the main menu will show from [No] to [Yes]. To click the menu, you can view the information.) * Ctrl+- : hide RadminM window to the system tray. * Ctrl+= : show RadminM window. * Double-click the system tray icon to hide or show RadminM window. * RadminM window is resizable, maximize and restore support. * RadminM supports Home, End, PageUp, PageDown, etc. 3. RadminM.txt of login information file (1). RadminM.txt description Login information is stored in RadminM.txt file. RadminM will automatically create if RadminM.txt is not exist. PassWord is encrypted by RC4, user keep attention to store. RadminM.txt is text file to follow CSV (ANSI) formatted. The contents of all field can not contain English exclamation mark "!", English comma ",", vertical separator "|". The first line is the the names of login record fields. There is only a record each line, what contains 18 fields delimited by 17 English comma. RecordName (Record Name) is the key field, support Chinese record name, but can not be empty, do not have the same record name. IP, Port, User, Password are the IP address, port, username, password. IP address can not be empty.The program will use the default port 4899 if the Port is empty. Domain is the domain name, it will be used to automatically fill in the login if Domain has content. ColorDepth is used with the "Full Control" connection mode (no mode switches) or "View Only" connection mode (the "/noinput" switch). Defines the color depth of images that Radmin Server will transfer to Radmin Viewer. ColorDepth is in inverse proportion to transmission rate. Updates is used with "Full Control" connection mode or "View Only" connection mode. Will display the remote computer window with no more than the specified number of updates per second. That is the maximum updates per second. Please input number between 1 to 100. UnlockDesktop is used with "Full Control" connection mode . After "Full Control" connection has successed, it can unlock the remote desktop with the connection password if the remote desktop has locked and the focus is in the password input box, or lock first the remote desktop then unlock when remote PC run Radmin Server v3.5. Fullscreen is used with the "Full Control" connection mode or "View Only" connection mode. Will display the remote computer window in full screen, or expanding the image if the screens resolution of the remote and local computer differs. Nofullkbcontrol is used with "Full Control" mode. The key prevents the transfer of system hotkeys (such as ALT-TAB) to the remote computer. Monitor is used with "Full Control" or "View Only" connection mode. If there are several monitors on the remote computer, this key makes it possible for you to display an image on one of them. Example: /monitor"\\.\DISPLAY1" . Note, you can only specify a monitor from which show on the connected window's menu. Sendrequest is to send specified Radmin Server activation request file to the Famatech Activation Server and saves received license file. Will ignore other options. Please refer to Radmin help for details. Pbpath is to start Radmin Viewer with specified phonebook file. Example: /pbpath"C:\my.rpb". Will ignore other options. Proxy is used to store private-proxy information of the record. Proxy Format: RecordName+TreePath. User need to select a record and set to forced-proxy at first, then fill as Proxy in the NewRecord or EditRecord dialog. AsProxyBy is being used as Proxy field. It is automatically processed by the program (Read Only). Memory is memo field. TreePath is the directory path field. TreePath is a string that consist of multiple strings division by English exclamation mark '!' (directory separator). It support Chinese directory name. Example: !DirA!DirB, the DirB under the DirA under the root. (2). The Proxy field This program not noly supports forced-proxy, each record but also can be specified private-proxy (abbreviated as Proxy). The Proxy field is used to store private-proxy information of the record, it can be only one. Note, user can only specify Proxy from existing records. Proxy Format: RecordName+TreePath. We recommend to select a record and set to forced-proxy at first, then fill as Proxy in the NewRecord or EditRecord dialog. Of course, you can also fill it by hand after familiar. (3). The AsProxyBy field The AsProxyBy field is being used as Proxy field, it is used to store the information which other records use this record as Proxy. Multiple records are delimited with vertical separator "|". It is automatically processed by the program (Read Only). This field is mainly used to automatically update the Proxy information of other records which use this record as Proxy when this record's RecordName or TreePath is changed. We recommend that user do not arbitrarily modify the contents of this field in RadminM.txt, otherwise the program may appear functional disorder. (4). Example: a fitting format RadminM.txt RecordName,IP,Port,User,Password,Domain,ColorDepth,Updates,UnlockDesktop,Fullscreen,Nofullkbcontrol,Monitor,Sendrequest,Pbpath,Proxy,AsProxyBy,Memory,TreePath sample01,192.168.0.6,4899,user01,,,,,,,,,,,,,,! sample02,192.168.0.8,4899,user02,,,,,,,,,,,,,,!DirA!DirB sample03,192.168.0.9,4899,user03,,,,,,,,,,,,,,!DirC!DirD 4. Translate and Preparation RadminM.txt (1). V2.0 to V3.0 RadminM.txt User can translate RadminM V2.0 record file to V3.0 by "V2.0 to V3.0 RadminM.txt" menu of Help in the main menu. Please backup RadminM.txt before performing the transfer. New file may overwrite RadminM.txt. (2). The v1.5 RadminM.txt need to translate to v2.0 fromat, then it can be translated to v3.0 The v1.5 RadminM.txt can be used in the new version after simply modification. The modification procedure is: (A) To open the v1.5 RadminM.txt by UltraEdit editor. (B) Ctrl+R to bring up the Replace dialog box, input in the above Find What pane: ^p, input in the below Replace With pane: ,!^p . (^p is CRLF here.). After properly setting, then click "Replace All" button. You may click the "Help" button to get the help information if you need. (C) Replace "!" with "TreePath" by hand at end of the first line. (D) Save the file to RadminM.txt after processed. You can also refer to complete a similar modification with other editors. After this, user can Translate it to v3.0 by fore-mentioned "V2.0 to V3.0 RadminM.txt" menu. Then it can be used in the new version v3.0. (3). To prepare RadminM.txt by Notepad, UltraEdit, Excel, etc RadminM.txt can be prepared using Notepad, UltraEdit, Excel, etc. You can also import RadminM.txt to Excel to process. The procedure is: (A) Start Excel, then click the menu "Data|Import External Data|Import Data", select RadminM.txt file. (B) Text Import Wizard - Step 1 of 3, direct click "Next". (C) Text Import Wizard - Step 2 of 3, you must check the "Comma" delimiter and then click "Next". (D) Text Import Wizard - Step 3 of 3, you must set all 18 columns to text format. You should select the data columns in turn below Data preview, and then check the "Text" above Column data format. After properly setting, to click "Finish" and "OK" to complete successfully import. (E) The file must save as CSV format after processed. The file can be used for RadminM after direct renamed to RadminM.txt. 5. UnlockDesktop feature of v3.0 newly additional (1). The UnlockDesktop feature After "Full Control" connection has successed, it can unlock the remote desktop with the connection password if the remote desktop has locked and the focus is in the password input box, or lock first the remote desktop then unlock when remote PC run Radmin Server v3.5. To successfully use this feature, there must be conditions: remote PC has already logined, and the password for locked remote desktop as same as the password for conneced Radmin Server, and the focus of remote desktop is in the password input box. (2). Possible security risk Note, there may be plaintext password, if the Radmin Server is old version before v3.5, and the remote desktop has not locked before to unlock, and the focus of remote desktop is exactly on a text edit box. (3). UnlockDesktop setting User can singly prepare UnlockDesktop setting for every record. UnlockDesktop setting is saved in UnlockDesktop filed of every record in RadminM.txt. To be deliberate, this feature is not enabled by default. User can choose and use this feature according to the actual situation. User can choose disabled this feature(Blank filed), or "UnlockDesktop", or "LockThenUnlock" for every record. When this filed is blank, that is disabled this feature, and there wiil not be plaintext password. When this filed is “UnlockDesktop”, that is directly unlock remote desktop. That suit each versions of Radmin Server. But there may be plaintext password. When this filed is “LockThenUnlock”, that is locked first the remote desktop then unlocked if the remote desktop has not locked before to unlock. This will avoid to appear plaintext password. But it must use the Radmin.exe of Radmin Viewer 3.5, and it only suit to connect Radmin Server v3.5. It can not send the Win+L LockScreen combination key to the remote computer by old version before Radmin Viewer 3.5. It can not receive the Win+L LockScreen combination key by old version before Radmin Server 3.5. The possibility to appear plaintext password still exists. 6. Related settings and Multilanguage support (1). Settings file RadminM.ini User may select the RadminM's related settings by Settings Menu of the main menu. All RadminM's related settings is stored in file RadminM.ini. RadminM will automatically create if RadminM.ini is not exist. If the RadminM main window can not display, it maybe the settings is confusion, or abnormal shutdown. User may backup the file RadminM.ini and then delete it. After this, user can run RadminM normal. (2). Multilanguage support This program achieve multilingual support by INI file. Each language information is stored in an INI format file with .lng extension. Language files is text file to follow Unicode or ANSI formatted. We generally recommended to use Unicode format. This mode has more scalability, the user can very simply and easily add your own language file. The default language of this program is simplified Chinese, there is other English language file English.lng as example. If there is no external language file, RadminM use the built-in default language(Chinese) when the program starts. If there are any *.lng external languages under this program directory, RadminM will automatically load and list in the "Settings|Language" menu after the program starts. In this menu, the name of external language is used the filename of the language file. By choosed a language in the menu, users can dynamically switch to the new language interface without having to restart the program. The user's language selection will be automatically saved to RadminM.ini file. After closeing the program, RadminM will automatically use the new language interface selected by the user when the next start. Users can refer to the format and content of English.lng, and easily prepared to modify their own language files, such French.lng. Users only need to copy the prepared language file to this program directory. After restarting the program, RadminM will automatically load and list the new language added by the user (such French) in the "Settings|Language" menu. By choosed the new language in the menu, users can dynamically switch to the new language interface without having to restart the program. After closeing the program, RadminM will automatically use the new language interface selected by the user when the next start. Note, Intermediate of language file can not have blank lines. Blank lines will mean the end of the file, the items will not be able to find the translation after the blank line. If you need a blank line identification or separator, you can add english semicolon in front of blank line. That is a comment line. If you need leading or rear guide space, the string of language file may be contained with double quotes or single quotes.Or it need not quotation marks. This program's multilingual support features achieve by reference of Yonsm's way, interested users may visit the website http://yonsm.net/ini-language-engine/. (3). Use Radmin Help If user want to use Help->Radmin Help of this program, user need to copy the chm help file to Radmin35.chm in the RadminM directory. 7. Disclaimer Users can choose and use this program at their discretion. Please indicate the source if reproduced. The author does not assume any responsibility for all the consequences!

struts_2.3.12GA_API文档(chm版本)

-------------------------------------------------------------------------------- 概述软件包类使用树已过时索引帮助上一个类下一个类框架无框架所有类摘要：嵌套 | 字段 | 构造方法 | 方法详细信息：字段 | 构造方法 | 方法 -------------------------------------------------------------------------------- com.opensymphony.xwork2 类 ActionSupport java.lang.Object 继承者 com.opensymphony.xwork2.ActionSupport 所有已实现的接口： Action, LocaleProvider, TextProvider, Validateable, ValidationAware, Serializable 直接已知子类： DefaultActionSupport -------------------------------------------------------------------------------- public class ActionSupportextends Objectimplements Action, Validateable, ValidationAware, TextProvider, LocaleProvider, SerializableProvides a default implementation for the most common actions. See the documentation for all the interfaces this class implements for more detailed information. 另请参见：序列化表格 -------------------------------------------------------------------------------- 字段摘要从接口 com.opensymphony.xwork2.Action 继承的字段 ERROR, INPUT, LOGIN, NONE, SUCCESS 构造方法摘要 ActionSupport() 方法摘要 void addActionError(String anErrorMessage) Add an Action-level error message to this Action. void addActionMessage(String aMessage) Add an Action-level message to this Action. void addFieldError(String fieldName, String errorMessage) Add an error message for a given field. void clearActionErrors() Clears action errors. void clearErrors() Clears all errors. void clearErrorsAndMessages() Clears all errors and messages. void clearFieldErrors() Clears field errors. void clearMessages() Clears messages. Object clone() String doDefault() String execute() A default implementation that does nothing an returns "success". Collection<String> getActionErrors() Get the Collection of Action-level error messages for this action. Collection<String> getActionMessages() Get the Collection of Action-level messages for this action. Collection<String> getErrorMessages() 已过时。 Use getActionErrors(). Map<String,List<String>> getErrors() 已过时。 Use getFieldErrors(). Map<String,List<String>> getFieldErrors() Get the field specific errors associated with this action. String getFormatted(String key, String expr) Dedicated method to support I10N and conversion errors Locale getLocale() Gets the provided locale. String getText(String aTextName) Gets a message based on a message key, or null if no message is found. String getText(String aTextName, List<?> args) Gets a message based on a key using the supplied args, as defined in MessageFormat, or null if no message is found. String getText(String aTextName, String defaultValue) Gets a message based on a key, or, if the message is not found, a supplied default value is returned. String getText(String key, String[] args) Gets a message based on a key using the supplied args, as defined in MessageFormat, or null if no message is found. String getText(String aTextName, String defaultValue, List<?> args) Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. String getText(String key, String defaultValue, List<?> args, ValueStack stack) Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. String getText(String aTextName, String defaultValue, String obj) Gets a message based on a key using the supplied obj, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. String getText(String key, String defaultValue, String[] args) Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. String getText(String key, String defaultValue, String[] args, ValueStack stack) Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. ResourceBundle getTexts() Get the resource bundle associated with the implementing class (usually an action). ResourceBundle getTexts(String aBundleName) Get the named bundle, such as "com/acme/Foo". boolean hasActionErrors() Check whether there are any Action-level error messages. boolean hasActionMessages() Checks whether there are any Action-level messages. boolean hasErrors() Checks whether there are any action errors or field errors. boolean hasFieldErrors() Check whether there are any field errors associated with this action. boolean hasKey(String key) Checks if a message key exists. String input() void pause(String result) Stops the action invocation immediately (by throwing a PauseException) and causes the action invocation to return the specified result, such as Action.SUCCESS, Action.INPUT, etc. void setActionErrors(Collection<String> errorMessages) Set the Collection of Action-level String error messages. void setActionMessages(Collection<String> messages) Set the Collection of Action-level String messages (not errors). void setContainer(Container container) void setFieldErrors(Map<String,List<String>> errorMap) Set the field error map of fieldname (String) to Collection of String error messages. void validate() A default implementation that validates nothing. 从类 java.lang.Object 继承的方法 equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait 构造方法详细信息 ActionSupport public ActionSupport()方法详细信息 setActionErrors public void setActionErrors(Collection<String> errorMessages)从接口 ValidationAware 复制的描述 Set the Collection of Action-level String error messages. 指定者：接口 ValidationAware 中的 setActionErrors 参数： errorMessages - Collection of String error messages -------------------------------------------------------------------------------- getActionErrors public Collection<String> getActionErrors()从接口 ValidationAware 复制的描述 Get the Collection of Action-level error messages for this action. Error messages should not be added directly here, as implementations are free to return a new Collection or an Unmodifiable Collection. 指定者：接口 ValidationAware 中的 getActionErrors 返回： Collection of String error messages -------------------------------------------------------------------------------- setActionMessages public void setActionMessages(Collection<String> messages)从接口 ValidationAware 复制的描述 Set the Collection of Action-level String messages (not errors). 指定者：接口 ValidationAware 中的 setActionMessages 参数： messages - Collection of String messages (not errors). -------------------------------------------------------------------------------- getActionMessages public Collection<String> getActionMessages()从接口 ValidationAware 复制的描述 Get the Collection of Action-level messages for this action. Messages should not be added directly here, as implementations are free to return a new Collection or an Unmodifiable Collection. 指定者：接口 ValidationAware 中的 getActionMessages 返回： Collection of String messages -------------------------------------------------------------------------------- getErrorMessages @Deprecated public Collection<String> getErrorMessages()已过时。 Use getActionErrors(). -------------------------------------------------------------------------------- getErrors @Deprecated public Map<String,List<String>> getErrors()已过时。 Use getFieldErrors(). -------------------------------------------------------------------------------- setFieldErrors public void setFieldErrors(Map<String,List<String>> errorMap)从接口 ValidationAware 复制的描述 Set the field error map of fieldname (String) to Collection of String error messages. 指定者：接口 ValidationAware 中的 setFieldErrors 参数： errorMap - field error map -------------------------------------------------------------------------------- getFieldErrors public Map<String,List<String>> getFieldErrors()从接口 ValidationAware 复制的描述 Get the field specific errors associated with this action. Error messages should not be added directly here, as implementations are free to return a new Collection or an Unmodifiable Collection. 指定者：接口 ValidationAware 中的 getFieldErrors 返回： Map with errors mapped from fieldname (String) to Collection of String error messages -------------------------------------------------------------------------------- getLocale public Locale getLocale()从接口 LocaleProvider 复制的描述 Gets the provided locale. 指定者：接口 LocaleProvider 中的 getLocale 返回： the locale. -------------------------------------------------------------------------------- hasKey public boolean hasKey(String key)从接口 TextProvider 复制的描述 Checks if a message key exists. 指定者：接口 TextProvider 中的 hasKey 参数： key - message key to check for 返回： boolean true if key exists, false otherwise. -------------------------------------------------------------------------------- getText public String getText(String aTextName)从接口 TextProvider 复制的描述 Gets a message based on a message key, or null if no message is found. 指定者：接口 TextProvider 中的 getText 参数： aTextName - the resource bundle key that is to be searched for 返回： the message as found in the resource bundle, or null if none is found. -------------------------------------------------------------------------------- getText public String getText(String aTextName, String defaultValue)从接口 TextProvider 复制的描述 Gets a message based on a key, or, if the message is not found, a supplied default value is returned. 指定者：接口 TextProvider 中的 getText 参数： aTextName - the resource bundle key that is to be searched for defaultValue - the default value which will be returned if no message is found 返回： the message as found in the resource bundle, or defaultValue if none is found -------------------------------------------------------------------------------- getText public String getText(String aTextName, String defaultValue, String obj)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied obj, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. 指定者：接口 TextProvider 中的 getText 参数： aTextName - the resource bundle key that is to be searched for defaultValue - the default value which will be returned if no message is found obj - obj to be used in a MessageFormat message 返回： the message as found in the resource bundle, or defaultValue if none is found -------------------------------------------------------------------------------- getText public String getText(String aTextName, List<?> args)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied args, as defined in MessageFormat, or null if no message is found. 指定者：接口 TextProvider 中的 getText 参数： aTextName - the resource bundle key that is to be searched for args - a list args to be used in a MessageFormat message 返回： the message as found in the resource bundle, or null if none is found. -------------------------------------------------------------------------------- getText public String getText(String key, String[] args)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied args, as defined in MessageFormat, or null if no message is found. 指定者：接口 TextProvider 中的 getText 参数： key - the resource bundle key that is to be searched for args - an array args to be used in a MessageFormat message 返回： the message as found in the resource bundle, or null if none is found. -------------------------------------------------------------------------------- getText public String getText(String aTextName, String defaultValue, List<?> args)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. 指定者：接口 TextProvider 中的 getText 参数： aTextName - the resource bundle key that is to be searched for defaultValue - the default value which will be returned if no message is found args - a list args to be used in a MessageFormat message 返回： the message as found in the resource bundle, or defaultValue if none is found -------------------------------------------------------------------------------- getText public String getText(String key, String defaultValue, String[] args)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. 指定者：接口 TextProvider 中的 getText 参数： key - the resource bundle key that is to be searched for defaultValue - the default value which will be returned if no message is found args - an array args to be used in a MessageFormat message 返回： the message as found in the resource bundle, or defaultValue if none is found -------------------------------------------------------------------------------- getText public String getText(String key, String defaultValue, List<?> args, ValueStack stack)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. Instead of using the value stack in the ActionContext this version of the getText() method uses the provided value stack. 指定者：接口 TextProvider 中的 getText 参数： key - the resource bundle key that is to be searched for defaultValue - the default value which will be returned if no message is found args - a list args to be used in a MessageFormat message stack - the value stack to use for finding the text 返回： the message as found in the resource bundle, or defaultValue if none is found -------------------------------------------------------------------------------- getText public String getText(String key, String defaultValue, String[] args, ValueStack stack)从接口 TextProvider 复制的描述 Gets a message based on a key using the supplied args, as defined in MessageFormat, or, if the message is not found, a supplied default value is returned. Instead of using the value stack in the ActionContext this version of the getText() method uses the provided value stack. 指定者：接口 TextProvider 中的 getText 参数： key - the resource bundle key that is to be searched for defaultValue - the default value which will be returned if no message is found args - an array args to be used in a MessageFormat message stack - the value stack to use for finding the text 返回： the message as found in the resource bundle, or defaultValue if none is found -------------------------------------------------------------------------------- getFormatted public String getFormatted(String key, String expr)Dedicated method to support I10N and conversion errors 参数： key - message which contains formatting string expr - that should be formatted 返回： formatted expr with format specified by key -------------------------------------------------------------------------------- getTexts public ResourceBundle getTexts()从接口 TextProvider 复制的描述 Get the resource bundle associated with the implementing class (usually an action). 指定者：接口 TextProvider 中的 getTexts 返回： the bundle -------------------------------------------------------------------------------- getTexts public ResourceBundle getTexts(String aBundleName)从接口 TextProvider 复制的描述 Get the named bundle, such as "com/acme/Foo". 指定者：接口 TextProvider 中的 getTexts 参数： aBundleName - the name of the resource bundle, such as "com/acme/Foo". 返回： the bundle -------------------------------------------------------------------------------- addActionError public void addActionError(String anErrorMessage)从接口 ValidationAware 复制的描述 Add an Action-level error message to this Action. 指定者：接口 ValidationAware 中的 addActionError 参数： anErrorMessage - the error message -------------------------------------------------------------------------------- addActionMessage public void addActionMessage(String aMessage)从接口 ValidationAware 复制的描述 Add an Action-level message to this Action. 指定者：接口 ValidationAware 中的 addActionMessage 参数： aMessage - the message -------------------------------------------------------------------------------- addFieldError public void addFieldError(String fieldName, String errorMessage)从接口 ValidationAware 复制的描述 Add an error message for a given field. 指定者：接口 ValidationAware 中的 addFieldError 参数： fieldName - name of field errorMessage - the error message -------------------------------------------------------------------------------- input public String input() throws Exception抛出： Exception -------------------------------------------------------------------------------- doDefault public String doDefault() throws Exception抛出： Exception -------------------------------------------------------------------------------- execute public String execute() throws ExceptionA default implementation that does nothing an returns "success". Subclasses should override this method to provide their business logic. See also Action.execute(). 指定者：接口 Action 中的 execute 返回： returns Action.SUCCESS 抛出： Exception - can be thrown by subclasses. -------------------------------------------------------------------------------- hasActionErrors public boolean hasActionErrors()从接口 ValidationAware 复制的描述 Check whether there are any Action-level error messages. 指定者：接口 ValidationAware 中的 hasActionErrors 返回： true if any Action-level error messages have been registered -------------------------------------------------------------------------------- hasActionMessages public boolean hasActionMessages()从接口 ValidationAware 复制的描述 Checks whether there are any Action-level messages. 指定者：接口 ValidationAware 中的 hasActionMessages 返回： true if any Action-level messages have been registered -------------------------------------------------------------------------------- hasErrors public boolean hasErrors()从接口 ValidationAware 复制的描述 Checks whether there are any action errors or field errors. Note: that this does not have the same meaning as in WW 1.x. 指定者：接口 ValidationAware 中的 hasErrors 返回： (hasActionErrors() || hasFieldErrors()) -------------------------------------------------------------------------------- hasFieldErrors public boolean hasFieldErrors()从接口 ValidationAware 复制的描述 Check whether there are any field errors associated with this action. 指定者：接口 ValidationAware 中的 hasFieldErrors 返回： whether there are any field errors -------------------------------------------------------------------------------- clearFieldErrors public void clearFieldErrors()Clears field errors. Useful for Continuations and other situations where you might want to clear parts of the state on the same action. -------------------------------------------------------------------------------- clearActionErrors public void clearActionErrors()Clears action errors. Useful for Continuations and other situations where you might want to clear parts of the state on the same action. -------------------------------------------------------------------------------- clearMessages public void clearMessages()Clears messages. Useful for Continuations and other situations where you might want to clear parts of the state on the same action. -------------------------------------------------------------------------------- clearErrors public void clearErrors()Clears all errors. Useful for Continuations and other situations where you might want to clear parts of the state on the same action. -------------------------------------------------------------------------------- clearErrorsAndMessages public void clearErrorsAndMessages()Clears all errors and messages. Useful for Continuations and other situations where you might want to clear parts of the state on the same action. -------------------------------------------------------------------------------- validate public void validate()A default implementation that validates nothing. Subclasses should override this method to provide validations. 指定者：接口 Validateable 中的 validate -------------------------------------------------------------------------------- clone public Object clone() throws CloneNotSupportedException覆盖：类 Object 中的 clone 抛出： CloneNotSupportedException -------------------------------------------------------------------------------- pause public void pause(String result)Stops the action invocation immediately (by throwing a PauseException) and causes the action invocation to return the specified result, such as Action.SUCCESS, Action.INPUT, etc. The next time this action is invoked (and using the same continuation ID), the method will resume immediately after where this method was called, with the entire call stack in the execute method restored. Note: this method can only be called within the execute() method. 参数： result - the result to return - the same type of return value in the execute() method. -------------------------------------------------------------------------------- setContainer public void setContainer(Container container) -------------------------------------------------------------------------------- 概述软件包类使用树已过时索引帮助上一个类下一个类框架无框架所有类摘要：嵌套 | 字段 | 构造方法 | 方法详细信息：字段 | 构造方法 | 方法 --------------------------------------------------------------------------------

OutlookAttachView v2.73

OutlookAttachView v2.73 Copyright (c) 2009 - 2014 Nir Sofer Web site: http://www.nirsoft.net Related Utilities ================= * NK2Edit - Edit, merge and fix the AutoComplete files (.NK2) of Microsoft Outlook. Description =========== OutlookAttachView scans all messages stored in your Outlook, and displays the list of all attached files that it finds. You can easily select one or more attachments and save all of them into the desired folder, as well as you can delete unwanted large attachments that take too much disk space in your mailbox. You can also save the list of attachments into xml/html/text/csv file. System Requirements =================== * Windows 2000/XP/Vista/7/8/2003/2008. * Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010, or Microsoft Outlook 2013. For the 64-bit version of Outlook 2010/2013, you should use the x64 version of OutlookAttachView. Be aware that OutlookAttachView doesn't work with Outlook Express. Versions History ================ * Version 2.73 o OutlookAttachView now also scans the root folder of the .pst file. * Version 2.72 o Added %from_email% and %to_email% variables to the attachment filename format. * Version 2.71 o Added %localmsgtime% and %localmsgdate% variables to the attachment filename format. o Fixed a crash problem occurred on some systems after version 2.70 update. * Version 2.70 o Fixed to display date/time values according to daylight saving time settings. * Version 2.69 o Fixed bug: OutlookAttachView crashed on some systems. * Version 2.68 o Added secondary sorting support: You can now get a secondary sorting, by holding down the shift key while clicking the column header. Be aware that you only have to hold down the shift key when clicking the second/third/fourth column. To sort the first column you should not hold down the Shift key. * Version 2.67 o Fixed bug: when turning on the 'Image Preview' option, OutlookAttachView displayed empty image or incorrect image. * Version 2.66 o Added more accelerator keys (in the menus). * Version 2.65 o Added 'Image Preview' option (Under the View menu). If you turn on this option, a preview of selected gif/png/jpg file will be displayed in the lower pane. Be aware that this feature is quite slow... * Version 2.63 o The number of attachments is now displayed in the status bar while scanning the mailbox of Outlook. * Version 2.62 o Added 'Recent Config Files' menu, which allows you to easily open the last 10 configuration files that you used. * Version 2.61 o Added GB and Automatic to the 'File Size Unit' option. * Version 2.60 o Added option to save and load the entire configuration of OutlookAttachView ('Save Configuration' and 'Load Configuration' under the File menu). * Version 2.56 o OutlookAttachView now remembers the last size and position of the 'Copy Selected Files To...' window. * Version 2.55 o You can now specify wildcards (For example: nir*.doc, abc???.txt) in the include/exclude filename option. * Version 2.51 o Added option to choose the file size display unit: Bytes, KB, or MB. * Version 2.50 o OutlookAttachView now remembers that last 20 strings you typed in the Extensions List, Excluded Extensions List, Subject contains string..., From string, and To string, and you can easily select a string again from a Combo-Box. * Version 2.47 o Added option to choose another font (font name and size) to display the attachments list. (Options -> Select Another Font) * Version 2.46 o Fixed the flickering occurred while scrolling the attachments list. * Version 2.45 o You can now resize the scan options dialog-box. Also, the last size and position of this dialog-box is saved to the config file. * Version 2.43 o Added %attach_id% variable to the attachment filename format. * Version 2.42 o Added option to change the maximum number of characters in every variable of formatted filename. (The default is 64 characters) * Version 2.41 o Added option to filter by the message direction (incoming or outgoing) in the Scan Options window. * Version 2.40 o Added %message_direction% and %message_entryid% variables to the attachment filename format. * Version 2.38 o The 'Show Inline Attachments' option is now turned on by default (In previous versions it was turned off). The reason for this changed: I found out that many users think that there is a bug in OutlookAttachView because they can't find some of the attachments, without understanding that they have to turn on the 'Show Inline Attachments' option. * Version 2.37 o Fixed issue: The properties and the options windows opened in the wrong monitor, on multi-monitors system. * Version 2.36 o Added 'Auto Size Columns+Headers' option, which allows you to automatically resize the columns according to the row values and column headers. * Version 2.35 o Added 'Message EntryID' column, which displays the ID string of the Outlook message. * Version 2.32 o Added %domain% variable to the attachment filename format. * Version 2.31 o Added /SaveDirect command line option, for using with the other save command-line options (/scomma, /stab, /sxml, and so on...) When you use the SaveDirect mode, the attachments list is saved directly to the disk, without loading them into the memory first. This means that you can save a list with large amount of attachment lines into your disk without any memory problem, as long as you have enough disk space to store the saved file. The drawback of this mode: You cannot sort the attachments according to the column you choose with /sort command-line option. * Version 2.30 o Added 'Domain' column, which displays the domain of the from/to email address. * Version 2.25 o Added 'Message Direction' column (Incoming or Outgoing). * Version 2.20 o Added 'From Email' and 'To Email' columns, which displays the From/To email addresses. (The existing To/From columns shows the 'Display Name') * Version 2.15 o Added 'Put Icon On Tray' option. * Version 2.11 o When trying to connect to Outlook 2010 with the wrong build of OutlookAttachView (OutlookAttachView 32-bit with Outlook x64 or OutlookAttachView x64 with Outlook 32-bit), OutlookAttachView now displays informative error message about the problem. * Version 2.10 o Changed the user interface of the Main Scan Options window, to make it useable for lower screen resolutions and to give more space to the folders/subjects/from/to include/exclude lists. * Version 2.05 o Added 'Skip Exchange public folders' option. * Version 2.00 o Added command-line options to change any configuration value. * Version 1.95 o Added /extractall command-line option, which allows you to extract all Outlook attachments from command-line, according to your saved settings. * Version 1.90 o Added option to scan only emails in the last xx days (alternative to the date/time range). * Version 1.85 o Added option to scan only emails with the specified 'From' and 'To' strings. * Version 1.82 o When adding a folder to scan (with the Add button), the folder path in now delimited with quotes, to ensure that it'll be scanned properly if the folder name contains a comma character. * Version 1.81 o Fixed a crash problem when trying to save outlook attachment. * Version 1.80 o Added 'Add' buttons, which allows you to easily add folders to scan or skip by choosing them from the list of Outlook folders. * Version 1.75 o Added the ability to choose the desired Outlook profile inside the 'Mailbox Scan Options' window. * Version 1.72 o You can now specify a folder with all its subfolders (to include or to skip) by adding * character to the folder string, for example: Personal Folders\Inbox* * Version 1.71 o Fixed OutlookAttachView to be able to scan the public folders of Exchange server. * Version 1.70 o Added option to specify a custom date/time format for the filename in the 'Copy Selected Files To...' option, for example: %msgdate:yyyyMMdd% , %msgtime:HHmmss% * Version 1.67 o OutlookAttachView now displays (in the status bar) the current copied filename while copying the attachments. It also allows you to stop the copying process by clicking the stop menu. * Version 1.66 o In the 'Copy Selected Files To...' window, you can now specify a subfolder in the attach filename format. For example, if the filename format is %folder_name%\%subject%_%attach_name%.%extension% - All attachments from the inbox will be saved under the Inbox subfolder, All attachments from Sent Items will be saved under the Sent Items subfolder, and so on... o You can also choose the 'Create subfolders automatically' option if you want that OutlookAttachView will automatically create the subfolders for you. * Version 1.65 o Added time fields for the scanning date range. o The date range is now saved in the .cfg file. * Version 1.63 o Added 2 actions to 'Double-Click Action': 'Open Selected Attachment With' and 'Copy Selected Attachment To' * Version 1.62 o Fixed bug: OutlookAttachView crashed when trying to extract a special type of attachment. * Version 1.61 o Added 'Mark Inline Attachments' option. When it's turned on, inline attachments are marked with blue background color. * Version 1.60 o Added /start command-line option, which instructs OutlookAttachView to start the mailbox scan immediately with the loaded configuraion, without displaying the Scan Options dialog-box. o Decreased the memory consumption when the list of found attachments is very large. * Version 1.57 o Added new option to specify the list of folders that you wish to skip (comma-delimited list). * Version 1.56 o Added 'Mark Odd/Even Rows' option, under the View menu. When it's turned on, the odd and even rows are displayed in different color, to make it easier to read a single line. * Version 1.55 o Added new option to specify the list of folders that you wish to scan (comma-delimited list), instead of scanning the entire mailbox. * Version 1.51 o Added 'Open Selected Attachment With...' option, which allows you to quickly view the content of the attachment with another application, instead of the default one. * Version 1.50 o Added 'Open Selected Attachment' option (F7), which allows you to quickly view the content of the attachment, without the need to extract the file and then open it from Explorer. Be aware that when you use this option, OutlookAttachView extracts the attachment into a temporary folder, and then opens it with the default application, according to the file extension. When you close OutlookAttachView, all temporary attachment files are automatically deleted. o Added to option to choose what to do when you double-click on a single attachment: Open Properties Window, Open Outlook Message, or Open Attachment File. * Version 1.47 o The status bar now displays the total size of selected attachments in KB/MB. * Version 1.46 o You can now send the attachments list to stdout by specifying an empty filename ("") in the command-line. (For example: OutlookAttachView.exe /stab "" > c:\temp\att.txt) * Version 1.45 o Add new filter: Scan only emails that their subject contains the specified string. * Version 1.41 o Added option to exclude one or more file extensions from the attachments list (in comma-delimited list). * Version 1.40 o Added Extension column, so now you can easily sort the list by the file extension of the attachments. o Added option to filter the attachments list by file extension - you can now specify the list of file extensions (in comma-delimited list) that you want to find. All attachments with file extensions that are not in the list won't be displayed. * Version 1.37 o Added /cfg command-line option for loading the configuration from another .cfg file. * Version 1.36 o Added %message_size% and %folder_path% (full folder path) variables to the attachment filename format. * Version 1.35 o Added an option to control the filename format for extracting the attachments. (In the 'Copy Selected Files To...' window) You can include the following fields in the created filename: Subject, From, To, Attachment Name, Folder Name, Message Date, and Message Time. o Added 'Set the modified time of the file to the time of the message' option. When it's turned on, the extracted attachment file will get the same modified time of the message that contains the attachment. * Version 1.30 o Added 'Email Software' column, which displays the email software that was used to send the message. The value is taken from x-mailer header line. This column is only relevant for received messages (Inbox). o Added 'Computer Address' column, which displays the computer name or IP addresses that sent the message. This column is only relevant for received messages (Inbox). * Version 1.25 o Added a new option to 'Mailbox Scan Options', which allows you to scan another profile of Outlook, instead of the default one. o Added 'Add Header Line To CSV/Tab-Delimited File' option. When this option is turned on, the column names are added as the first line when you export to csv or tab-delimited file. * Version 1.21 o Added support for embedded message attachments (attachments of another message). These attachments are saved as .msg files. * Version 1.20 o Added option to filter by attachment size. o Fixed issue: removed the wrong encoding from the xml string, which caused problems to some xml viewers. * Version 1.15 o Added 'MailBox Scan Options' window, which allows you to choose the dates range to scan. o Fixed bug: The 'Created On' column displayed wrong dates in some Outlook configurations. * Version 1.13 o Added 'Copy Selected Attachments To...' into the right-click context menu. Also, changed the 'Save Selected Items' to 'Export Attachments Information', to avoid the confusion between saving the attachment files and exporting the attachments details. o Added separated x64 version - for using only with x64 version of Outlook 2010. * Version 1.12 o Fixed a crash problem when using this utility with IMAP accounts. * Version 1.11 o Added sorting command-line options. * Version 1.10 o Added 'Open Message In Outlook' option. * Version 1.06 o Added 'Clean Selected Attachments' option - clean the content of attachment, but without removing the attachment entry. * Version 1.05 o Fixed bug: OutlookAttachView failed to scan sub-folders under main Outlook folders. o Added 'Folder Path' column. * Version 1.00 - First release. Using OutlookAttachView ======================= OutlookAttachView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file - OutlookAttachView.exe If you have only one profile in your Outlook, and this profile doesn't require any password, you can run OutlookAttachView even without starting Outlook, and it'll automatically scan the mailbox of your current Outlook profile. Otherwise, it's recommended to open Outlook in the right profile before starting OutlookAttachView. After running OutlookAttachView, the 'MailBox Scan Options' window will be displayed. This window allows to choose to scan your mailbox only in specific dates range. After choosing 'Ok' in the options window, OutlookAttachView starts to scan your Outlook messages and display the found attachments in the main window of OutlookAttachView. If you want to stop the scan process, simply choose the 'Stop' menu. After the scanning process is finished, you can select one or more of your attached files, and copy them into the desired folder, by using the 'Copy Selected Files To' option. If have large attachments that you want to delete, you can use the 'Delete Selected Attachments' option. Be aware that when you use the delete option, only the attachment file is deleted. The message itself remains on your mailbox. You can also use the 'Clean Selected Attachments' option to clean most of the attachment content, but without removing the attachment entry. If you use this option, you'll still see the attachment listed in your email message with small file size, but saving this attachment to a file will create a corrupted file. Inline Attachments ================== Attachments embedded as a part of the message body are detected as 'Inline Attachments'. By default, OutlookAttachView doesn't displays these inline attachments. If you can't find the attachments you're looking for, you should try to turn on the 'Show Inline Attachments' option, located under the Options menu. Control The Filename Format of Extracted Attachment =================================================== When you extract one or more attachments from your Outlook mailbox, you can control the way that the attach filename is generated. By default, OutlookAttachView use the following format: %attach_name%.%extension%, which means that the generated filename will only contain the original attachment name and the file extension. However, you can also use the following special variables to format the filename according to your needs: * %attach_name% - The original name of the attachment. * %extension% - The original file extension of the attachment. * %subject% - The subject of the email contains this attachment. * %folder_name% - The folder name of this email (Inbox, Sent Items, and so on) * %from% - The sender of the email. * %to% - The 'To' field of the email. * %message_date% - Message creation date in yyyymmdd format. * %message_time% - Message creation time in HHmmss format. * %message_size% - Attachment size, in bytes. * %folder_path% - Full folder path of this email. (For example: Personal Folder-Inbox) * %msgdate:[format]% - Message creation date (GMT), in any format you need, for example: %msgdate:yyyyMMdd% , %msgdate:ddMMyy% * %msgtime:[format]% - Message creation time (GMT), in any format you need, for example: %msgtime:HHmmss% * %localmsgdate:[format]% - Message creation date (local time), in any format you need, for example: %localmsgdate:yyyyMMdd% , %localmsgdate:ddMMyy% * %localmsgtime:[format]% - Message creation time (local time), in any format you need, for example: %localmsgtime:HHmmss% For example: If you want to generate the attachment filename with the subject, folder name, and attach name: %folder_name%_%subject%_%attach_name%.%extension% Be aware that some of the values are automatically truncated after 64 characters, in order to avoid from over-sized filenames. Scanning Outlook Attachments of External PST Files ================================================== If you want to search an attachment in one or more PST files that are not loaded in your Outlook profile, you can use the following trick: 1. Go to Control Panel -> Mail and choose 'Show Profiles' 2. Click 'Add' to create a new profile. 3. Fill the email account information with faked details (You can delete it afterwards) 4. After the profile is created, double click on the profile, and in the profile properties, click 'Data Files' and add the desired PST files that you wish to scan. 5. Also, you can click the 'E-mail Accounts' button, and remove the faked account that you previously created. 6. In the Mailbox Scan Options of OutlookAttachView, choose 'Allow me to choose the profile' in the Outlook Profile option. 7. When you are asked to choose the profile, you should choose the profile that you created, and OutlookAttachView will scan the PST files that you added into it. Command-Line Options ==================== /stext Save the list of all Outlook attachments into a regular text file. /stab Save the list of all Outlook attachments into a tab-delimited text file. /scomma Save the list of all Outlook attachments into a comma-delimited text file. /stabular Save the list of all Outlook attachments into a tabular text file. /shtml Save the list of all Outlook attachments into HTML file (Horizontal). /sverhtml Save the list of all Outlook attachments into HTML file (Vertical). /sxml Save the list of all Outlook attachments to XML file. /SaveDirect Save the Outlook attachments in SaveDirect mode. For using with the other save command-line options ( /scomma, /stab, /sxml, and so on...) When you use the SaveDirect mode, the attachments list is saved directly to the disk, without loading them into the memory first. This means that you can save a list with large amount of attachment lines into your disk without any memory problem, as long as you have enough disk space to store the saved file. The drawback of this mode: You cannot sort the attachments according to the column you choose with /sort command-line option. /sort This command-line option can be used with other save options for sorting by the desired column. If you don't specify this option, the list is sorted according to the last sort that you made from the user interface. The parameter can specify the column index (0 for the first column, 1 for the second column, and so on) or the name of the column, like "Filename" and "Subject". You can specify the '~' prefix character (e.g: "~Subject") if you want to sort in descending order. You can put multiple /sort in the command-line if you want to sort by multiple columns. Examples: OutlookAttachView.exe /shtml "f:\temp\attach.html" /sort 2 /sort ~1 OutlookAttachView.exe /shtml "f:\temp\attach.html" /sort "From" /sort "To" /sort "Subject" /nosort When you specify this command-line option, the list will be saved without any sorting. /cfg Starts OutlookAttachView with the specified configuration file instead of the default OutlookAttachView.cfg /start Starts the mailbox scan immediately with the loaded configuraion, without displaying the Scan Options dialog-box. /extractall Extracts all Outlook attachments from command-line, according to your last settings saved in the default .cfg file, or according to other configuration file that you load with /cfg command-line option. You can also use the following command-line options to change any configuarion value you wish: /CopyFilesFolder /NewNameIfExist /UpdateModifiedTimeMessage /FilenameFormat /ScanOptions.TimeZone /ScanOptions.OutlookProfile /ScanOptions.UseExtensionsList /ScanOptions.ExtensionsList /ScanOptions.UseExcludeExtensionsList /ScanOptions.ExcludeExtensionsList /ScanOptions.UseSubjectContains /ScanOptions.SubjectContains /ScanOptions.ScanOnlyFolders /ScanOptions.ScanFoldersList /ScanOptions.SkipFolders /ScanOptions.SkipFoldersList /ScanOptions.DateFrom /ScanOptions.DateTo /ScanOptions.UseDateRange /ScanOptions.OutlookProfileString /ScanOptions.UseFromList /ScanOptions.FromList /ScanOptions.UseToList /ScanOptions.ToList /ScanOptions.UseOnlyLastDays /ScanOptions.OnlyLastDays For example, if you want to extract all attachments into c:\myattach instead of using the folder specified in the config file: OutlookAttachView.exe /CopyFilesFolder "c:\myattach" /extractall Translating OutlookAttachView to other languages ================================================ In order to translate OutlookAttachView to other language, follow the instructions below: 1. Run OutlookAttachView with /savelangfile parameter: OutlookAttachView.exe /savelangfile A file named OutlookAttachView_lng.ini will be created in the folder of OutlookAttachView utility. 2. Open the created language file in Notepad or in any other text editor. 3. Translate all string entries to the desired language. Optionally, you can also add your name and/or a link to your Web site. (TranslatorName and TranslatorURL values) If you add this information, it'll be used in the 'About' window. 4. After you finish the translation, Run OutlookAttachView, and all translated strings will be loaded from the language file. If you want to run OutlookAttachView without the translation, simply rename the language file, or move it to another folder. License ======= This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you distribute this utility, you must include all files in the distribution package, without any modification ! Disclaimer ========== The software is provided "AS IS" without any warranty, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The author will not be liable for any special, incidental, consequential or indirect damages due to loss of data or any other reason. Feedback ======== If you have any problem, suggestion, comment, or you found a bug in my utility, you can send a message to nirsofer@yahoo.com

基于mediastreamer2的网络电话实现流程以及源码库

首先接到这一个项目，说是要用mediastreamer2做一个网络电话。之前也是从来没有接触过。于是首先开始在百度中搜索一下需要哪些东西，以及那些步骤。最后大致了解了一下，做这个项目最终要的就是需要移植好多的库，每一个库都需要配置，最后在交叉编译好动态库，然后在执行mediastreamer2的时候去调用这些动态库和头文件就OK了。 1、首先meidastream2是基于ortp库的，那么首先就是下载源码，交叉编译。交叉编译ortp 下载源码：http://savannah.c3sl.ufpr.br/linphone/ortp/sources/?C=S;O=A 我使用0.18.0版本 ortp-0.18.0.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf ortp-0.18.0.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --host=arm-linux --target=arm-linux --prefix=/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 这样子就完成了配置，编译，安装。（安装目录为/home/protocol_stack/install/,也就是最后生成的头文件，可执行文件，库文件都会在这个目录下） 2、因为项目是要用到SIP协议的，所以我们还需要移植sip的库 osip2和eXosip2协议，这两个协议对应两个库，osip是简单的osip协议，但是因为API少等一系列原因，增加了eXosip2对osip2的补充。交叉编译osip2 下载源码：http://ftp.gnu.org/gnu/osip/ 我使用的版本是3.6.0 libosip2-3.6.0.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf libosip2-3.6.0.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --target=arm-linux --prefix=/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 交叉编译eXosip2 下载源码：http://ftp.gnu.org/gnu/osip/ 我使用的版本是3.6.0 libeXosip2-3.6.0.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf libeXosip2-3.6.0.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --target=arm-linux --prefix=/home/protocol_stack/install/ PKG_CONFIG_PATH=/home/protocol_stack/install/lib/pkgconfig make make install 然后用chmod 777 **.sh 执行脚本./**.sh 接下来可以编译mediastreamer2了，不过ms2，依赖好多库：ogg、speex、pulseaudio。而pulseaudio又依赖许多库：alsa、json、libtool。 3、交叉编译ogg 下载源码：http://xiph.org/downloads/ 我使用1.3.1版本 libogg-1.3.3.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf libogg-1.3.3.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --prefix=/home/protocol_stack/install/ --host=arm-linux make make install 然后用chmod 777 **.sh 执行脚本./**.sh 4、交叉编译speex 下载源码：http://www.speex.org/downloads/ 我使用1.2rc1版本 speex-1.2rc1.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf speex-1.2rc1.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --prefix=/home/protocol_stack/install/ --with-ogg=/home/protocol_stack/install/ --enable-fixed-point --disable-float-api \ --host=arm-linux make make install 然后用chmod 777 **.sh 执行脚本./**.sh 5、交叉编译pulseaudio 下载源码：http://freedesktop.org/software/pulseaudio/releases/ 我使用1.0版本 pulseaudio-1.0.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf pulseaudio-1.0.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc CXX=arm-linux-g++ --prefix=/home/protocol_stack/install --host=arm-linux --disable-rpath --disable-nls --disable-dbus --disable-bluez --disable-samplerate --disable-solaris --disable-gconf --disable-avahi --disable-jack --disable-lirc --disable-glib2 --disable-gtk2 --disable-openssl --disable-ipv6 --disable-asyncns --disable-per-user-esound-socket --disable-oss-output --disable-oss-wrapper --disable-x11 --enable-neon-opt=no --with-database=simple PKG_CONFIG_PATH=/home/protocol_stack/install/lib/pkgconfig CPPFLAGS=-I/home/protocol_stack/install/include LDFLAGS=-L/home/protocol_stack/install/lib CFLAGS=-I/home/protocol_stack/install/include make make install 然后用chmod 777 **.sh 执行脚本./**.sh 错误1： checking for ltdl.h... no configure: error: Unable to find libltdl version 2. Makes sure you have libtool 2.4 or later installed. make: *** No targets specified and no makefile found. Stop. 分析；找不到libltdl。确保你有libtool 2.4及以上的版本。下载libtool 2.4.2版本这时需要交叉编译libtool 下载源码：ftp://ftp.gnu.org/gnu/libtool/ 我使用2.4.2版本 libtool-2.4.2.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf libtool-2.4.2.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --prefix =/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 交叉编译alsa： http://www.alsa-project.org/main/index.php/Main_Page 这个库的版本需要根据你嵌入式Linux内核中alsa的版本而定，可以使用命令查看内核中alsa的版本： # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. 可以到内核中alsa驱动版本是1.0.24，所以我选1.0.24版本 alsa-lib-1.0.24.1.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf speex-1.2rc1.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --prefix =/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 错误：configure: error: Package requirements ( sndfile >= 1.0.20 ) were not met: No package 'sndfile' found 分析：缺少库 libsndfile库，那么接下来再进行交叉编译libsndfile libsndfile-1.0.25.tar.gz http://www.linuxfromscratch.org/blfs/view/svn/multimedia/libsndfile.html 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf libsndfile-1.0.25.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure --host=arm-linux --prefix =/home/protocol_stack/install/ make make install 然后用chmod 777 **.sh 执行脚本./**.sh 7、最后编译mediastreamer2 下载源码：http://ftp.twaren.net/Unix/NonGNU//linphone/mediastreamer/ 我使用2.8版本 mediastreamer-2.8.0.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf mediastreamer-2.8.0.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置把下边这三行写成一个脚本 vim **.sh ./configure CC=arm-linux-gcc --prefix=/home/protocol_stack/install/ PKG_CONFIG_PATH=/home/protocol_stack/install/lib/pkgconfig --disable-gsm --enable-video=no --enable-macsnd=no --disable-static --disable-sdl --disable-x11 --disable-ffmpeg --host=arm-linux --target=arm-linux make make install 然后用chmod 777 **.sh 执行脚本./**.sh 上面的configure选项没有屏蔽v4l1和v4l2，所以还得交叉编译v4l 编译v4l libv4l-0.6.4.tar.gz 下载源码：http://pkgs.fedoraproject.org/repo/pkgs/libv4l/ 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf libv4l-0.6.4.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置我使用0.6.4版本 libv4l-0.6.4.tar.gz make clean make CC=arm-linux-gcc make install PREFIX=/home/protocol_stack/install 编译mediastreamer2出错：(1)checking for LIBCHECK... no checking for LIBJSON... no configure: error: Package requirements ( json >= 0.9 ) were not met: No package 'json' found 解决方法就是交叉编译json 下载源码：http://ftp.debian.org/debian/pool/main/j/json-c/ 分析：缺少json库，那么我们继续交叉编译json库 json-c_0.12.1.orig.tar.gz 然后通过winshare（Windows和Linux的通信）把下载好的库文件拷贝到Linux下，然后解压 tar zxvf mediastreamer-2.8.0.tar.gz 注意这个时候可能会发生错误，是没有权限的问题，那么就在命令行前边加上sudo 然后配置 ./configure --host=linux-arm \ --prefix =/home/protocol_stack/install/ make && make install 好了，json库已经编译完成了。接下来我们继续编译mediastreamer2 。。。。。但是还是有问题，怎么办呢？还是哪个问题还是找不到json库。分析：在json的论坛中，找到了解决方案：把编译生成的/lib/pkgconfig/这个目录下生成了一个json-c.pc。最后mediastreamer2在调用的时候找的是json.pc。那么我们就把这个文件名改为json.pc #mv json-c.pc json.pc OK，这次这个是可以编译的过去了。接下来继续编译。。。又出现问题了 /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_malloc' /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_realloc' 问题分析：这个错误的原因是因为没有定义 rpl_malloc 和 rpl_realloc 这两个变量。那么我们应该怎么办么？那么就在这个目录下进行查这两个变量是在哪里定义的？于是：#grep "rpl_malloc" -nR * ....... 找到了，原来这两个变量是在这个config的文件中的。是一个宏开关那么就好办了，我们就直接把这两个宏进行注释。嗯嗯，继续。。。我们重新编译json库。。。嗯嗯编译好了，接下来继续来编译mediastreamer2 。。。。又出错了，还是这个原因 /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_malloc' /home/protocol_stack/install/lib/libjson.so: undefined reference to `rpl_realloc 嗯嗯，还是这个原因？究竟是为什么呢。再次来到json的目录下，再次看有没有把那两个宏开关给关闭？嗯哼？竟然没有关闭？分析？明白了。原来是我把配置和编译同时执行了。这个宏开关是./configure ...生成的。那么就只好，这样。把./configure。。。生成的config文件，再进行关闭宏开关。最后直接make && make install -j8 直接编译，安装，是不能再次进行配置的。因为以配置config文件就会再次生成，那么宏开关就又开了。 OK，安装好了，下来继续进行编译mediastreamer2.。。。。。。。。。。。。。。。。。。。。。。。。。又出现了问题？ error: /user/include/python2.7/pyconfig.h:15:52: fatal error: arm-linux-gnueabi/python2.7/pyconfig.h: No such file or directory compilation terminated. 分析：：找不到arm-linux-gnueabi/python2.7/pyconfig.h这文件。那就继续交叉编译python 好吧，继续下载python,然后再进行交叉编译，但是编译Python的时候出来一系列的问题。根本没有办法解决。那么该怎么办呢？时候一个小时又一个小时的过去？最后有一个大胆的想法，既然python都编译不下去。那就不要了。于是，在mediastreamer2的./configure 中添上一项 --without-python 。。。。再次配置编译。。。。。。。。。。。 error: /user/include/python2.7/pyconfig.h:15:52: fatal error: arm-linux-gnueabi/python2.7/pyconfig.h: No such file or directory compilation termiated. 嗯哼？还是一样的错误。怎么办呢？于是乎就又在论坛上进行找灵感。。。。。还是找不到。。。又一结合前边几个库的配置编译，发现不使能一个模块还可以用另外一个--disable-python 。。。于是乎就把--without-python改为了--disable-python 继续编译。。。。。。。。。。。。。。。。。。。。。。。。。到了这个节骨眼上了，编译每跳一下，我的心就跟着逗一下。。。。心酸。。。。。。。。。。。。。。。。。。竟然编译成功了。。。。哈哈。。。。。。。。。于是，马上就把编译好的库，拷贝到了开发板。。。嗯嗯，本来还想把编译好的库目录树拷贝下的，但是太多了，放不下。。。算了吧。。。。找到编译好的库在库中的/bin中找到arm-linux-mediastream 然后执行./arm-linux-mediastream 。。。。报错了问题： error : while loading shared libraries: libmediastreamer.so.1: cannot open shared object file: No such file 答案：分析：遇到这个问题就是，libmediastreamer.so.1这个动态库，在可执行文件armlinuxmediastreamer执行的时候，会调用这个动态库，但是环境变量中找不到这个动态库。那么我们就是要把我们编译好的动态链接库的目录加到环境变量中 LD_LIBRARY_PATH=$LD_LIBRARY_PATH://arm/lib/这个目录下就是放着我们编译好的所有的动态链接库（包括libmediastreamer.so.1）执行步骤：LD_LIBRARY_PATH=$LD_LIBRARY_PATH://arm/lib export LD_LIBRARY_PATH ./arm-linux-mediastream mediastream --local --remote --payload [ --fmtp ] [ --jitter ] [ --width ] [ --height ] [ --bitrate ] [ --ec (enable echo canceller) ] [ --ec-tail ] [ --ec-delay ] [ --ec-framesize ] [ --agc (enable automatic gain control) ] [ --ng (enable noise gate)] [ --ng-threshold (noise gate threshold) ] [ --ng-floorgain (gain applied to the signal when its energy is below the threshold.) ] [ --capture-card ] [ --playback-card ] [ --infile <input wav file> specify a wav file to be used for input, instead of soundcard ] [ --outfile specify a wav file to write audio into, instead of soundcard ] [ --camera ] [ --el (enable echo limiter) ] [ --el-speed (gain changes are smoothed with a coefficent) ] [ --el-thres (Threshold above which the system becomes active) ] [ --el-force (The proportional coefficient controlling the mic attenuation) ] [ --el-sustain (Time in milliseconds for which the attenuation is kept unchanged after) ] [ --el-transmit-thres (TO BE DOCUMENTED) ] [ --rc (enable adaptive rate control) ] [ --zrtp (enable zrtp) ] [ --verbose (most verbose messages) ] [ --video-windows-id <video surface:preview surface>] [ --srtp (enable srtp, master key is generated if absent from comand line) [ --netsim-bandwidth (simulates a network download bandwidth limit) 于是按照第一种方式进行参数添加 ./arm-linux-mediastream --local 8888 --remote 127.0.0.1:88 88 OK运行正常了下面是运行信息。。。 ortp-message-audio_stream_process_rtcp: interarrival jitter=119 , lost packets percentage since last report=0.000000, round trip time=0.000000 seconds ortp-message-oRTP-stats: RTP stats : ortp-message- number of rtp packet sent=150 ortp-message- number of rtp bytes sent=25800 bytes ortp-message- number of rtp packet received=150 ortp-message- number of rtp bytes received=25800 bytes ortp-message- number of incoming rtp bytes successfully delivered to the application=25284 ortp-message- number of rtp packet lost=0 ortp-message- number of rtp packets received too late=0 ortp-message- number of bad formatted rtp packets=0 ortp-message- number of packet discarded because of queue overflow=0 ortp-message-Bandwidth usage: download=81.290281 kbits/sec, upload=81.288664 kbits/sec ortp-message-Receiving RTCP SR ortp-message-Receiving RTCP SDES ortp-message-Found CNAME=unknown@unknown ortp-message-Found TOOL=oRTP-0.18.0 ortp-message-Found NOTE=This is free sofware (LGPL) ! ortp-message-Quality indicator : 4.888437 运行正常了。。。。。。

目录